User's Manual

2.2 Driver installation under Windows ME

2.2.1 Before Installation

Make sure to install the software in the following order.

1) Install the Application software (refer to 2.1 Installing FusionHDTV Applications)

2) Install Hardware(Board) (refer to 3.3 Board Installation)

3) Install Windows ME Driver (refer to 2.2.2 Installing Windows ME driver)

4) Check Windows ME device manger (refer to 2.2.3 Checking Windows ME Driver)

2.2.2 Installing the Windows ME driver

1) Insert the FusionHDTV board into the PCI local bus slot. When Windows ME starts, the

Add New Hardware Wizard will pop up automatically.

2) The Found New Hardware window will pop and FusionHDTV 88x, WDM Video Capture

driver will be installed automatically.

3) The Add New Hardware Wizard will pop up automatically and “FusionHDTV

88x,Transport Stream Capture(ATSC-A)” driver will be installed automatically.

4) After the Files Needed Window appears, look for the ‘zl88Tcap.sys’ file by clicking the

browse button. Select the driver directory under the installation directory. (ex :

C:\Program Files\Dvico\FusionHDTV\driver)

5) If a version conflict message appears during installing, preserve existing file by

pressing ‘Keep’.

6) The Add New Hardware Wizard will pop up automatically and “FusionHDTV 88x,

Thomson7611+LG3302 WDM TV Tuner” driver installation will be done automatically.