MSDS

SAFETY DATA SHEET
1. Identification
Product identifier USG® DUROCK™ Sealant
Other means of identification
SDS number
14000020003
Synonyms
Moisture Curing Sealant
Recommended use
Interior Use
Recommended restrictions
Use in accordance with manufacturer's recommendations.
Manufacturer/Importer/Supplier/Distributor information
Company name
United States Gypsum Company
Address
550 West Adams Street
Chicago, Illinois 60661-3637
Telephone
1-800-874-4968
Website
www.usg.com
Emergency phone number
1-800-507-8899
2. Hazard(s) identification
Not classified.
Physical hazards
Category 2Serious eye damage/eye irritation
Health hazards
Category 1Sensitization, skin
Not classified.
OSHA defined hazards
Label elements
Signal word
Warning
Hazard statement
May cause an allergic skin reaction. Causes serious eye irritation.
Precautionary statement
Prevention
Avoid breathing mist or vapor. Wash thoroughly after handling. Contaminated work clothing must
not be allowed out of the workplace. Wear protective gloves/eye protection/face protection.
Response
If on skin: Wash with plenty of water. If skin irritation or rash occurs: Get medical advice/attention.
Wash contaminated clothing before reuse. If in eyes: Rinse cautiously with water for several
minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation
persists: Get medical advice/attention.
Storage
Store away from incompatible materials.
Disposal
Dispose of in accordance with local, state, and federal regulations.
Hazard(s) not otherwise
classified (HNOC)
None known.
Supplemental information
Not applicable.
3. Composition/information on ingredients
Mixtures
1317-65-3 < 65Limestone
CAS number %Chemical name
1760-24-3 < 5N-(3-(trimethoxysilyl)propyl)eth
ylenediamine
USG® DUROCK™ Sealant SDS US
920351 Version #: 01 Revision date: - Issue date: 27-May-2014
1 / 6

Summary of content (6 pages)