Specifications

9 of 16
DUKE PROOFER OVEN
RESTAURANT
EQUIPMENT
MANUAL
REVISED:
June 9, 2004
DUKE PROOFER OVEN
DUKE MANUFACTURING CO.
TOLL FREE 1-800-735-DUKE(3853)
1
-
314
-
231
-
1130
Door Adjustments & Gasket Maintenance
Proofer Drip Channel Reversal
The proofer door has a sloped drip channel on the bottom that directs any water that
drips down the door in to the water pan below the door. When the door swing is
reversed this drip channel must be replaced with a new channel that has the slope in
the proper direction. Contact Duke Manufacturing Service for a new drip channel
before changing door swing direction.
1. Follow the directions for removing
the door on the last page. When the
door is off you can then replace the
drip channel.
2. Remove the screws that hold the
drip channel on and remove the drip
channel. Use the same screws to fill
the empty holes after the drip
channel is off.
3. Locate the new drip channel on the
other end of the door. Make sure that
the slope is directed to the hinge
side of the door.
4. Fasten the drip channel to the door
with the self tapping screws
provided with the new drip channel.
5. Follow the directions for mounting
the door on the last page.
Left Hinge Drip Channel
Right Hinge Drip Channel