User Guide

fig. 51.3
fig. 51.2
2
A B C
74
E
Three fuses (fig. 51.2) placed behind the control unit
protect the relays of the injection system. Their ratings
are: 7.5 A (A); 20 A (B); 5 A (C).
The fuse located on a side of the battery (fig. 51.3)
protects the electronic regulator. Remove the fuse cap (2)
to expose it.
A blown fuse is identified by the interrupted inner
filament (3, fig. 51.4).
Important
Switch the ignition key to OFF before replacing
the fuse to avoid possible short circuits.
Warning
Never use a fuse with a rating other than specified.
Failure to observe this rule may damage the electric
system or even lead to fire.