Owner`s manual

Headlamp fairing

Note

The rear-view mirrors and side body panels must

first be removed as described above to allow removal of

the headlamp fairing.

Pull the instrument panel (1) until clear of the rubber

grommets (2) and disconnect the connector (3) at the

main wiring harness end.

Disconnect the connectors of the parking light bulb.

Unscrew the two screws (4) that secure the headlamp

fairing to the headlamp support at either side.

Note

After refitting the headlamp fairing, refit the side

body panels and the rear-view mirrors.

fig. 50

fig. 51