Owner`s manual

XDVD710 OPERATION

White = No disc

Red = Disc inserted

Press ANGLE  to increase the monitor view angle.

Press ANGLE  to decrease the monitor view angle.

Notes:

•Donotattempttomovethemonitorup/downbyhand-severedamagewill

occur. Use the front panel buttons or the remote control only.

•ThecoloroftheLCDmonitorvariesbetweenviewingangles.Selecttheangle

with the most optimum view for your location.

•Thelastpositionofthemonitorwillbesavedinmemory.Themonitorwill

return to its last position automatically the next time it is opened.

Press INFO button for 1 second to display DVD disc information.

Press and hold INFO for 2 seconds to change TFT LCD BRIGHTNESS:

Press ANGLE  to increase, ANGLE  to decrease or use VOLUME rotary to

adjust the level up or down, (0 minimum/20 maximum), 10 is default.

If you experience abnormal operation or, your unit is inoperable, press the

RESET button for 3 seconds, located on the front bottom-right corner of the unit.

After a system reset, the unit restores all factory default settings.

Note: Use the tip of a pen to access the button.

Disc-in indicator

Monitor Angle 

INFO/PIC

SYSTEM RESET

Control Functions - Monitor Open