XDVD710 INSTALLATION/OWNER’S MANUAL DVD Multimedia Receiver with 7” Touch Screen Display TOUCH Safety Notes: The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.
Copyright Notes This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
XDVD710 PREPARATION Table of Contents Page DVD Region Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Safety Information/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparation/Mounting/Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Remote Control Overview . . . . . . . . . . . . . . . . . . . . . .
XDVD710 PREPARATION WARNING Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage.
XDVD710 OPERATION Safety Information Please read all instructions carefully before attempting to install or operate. Due to its technical nature, it is highly recommended that your DUAL XDVD710 is installed by a professional installer or an authorized dealer. This product is only for use in vehicles with 12VDC negative ground only. Safety Notes: The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction.
XDVD710 INSTALLATION Preparation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started • Slide the unit out of the mounting sleeve. • Install mounting sleeve into opening, bending tabs to secure.
XDVD710 INSTALLATION Expanded Wiring Diagram - Inputs/Outputs Wiring Notes: Subwoofer output The SUBWOOFER audio output (Blue RCA) is active in all audio modes and must be connected to an external amplifier. Rear view camera A rear view camera (not included) can be used with the CAMERA input. NEED HELP?? Call our Technical Service Hotline, 1-866-382-5476. Safety Notes: The DVD video display of the in-dash unit will not operate while the vehicle is moving.
XDVD710 INSTALLATION Wiring Diagram - Optional A/V Connections
XDVD710 OPERATION IR Remote Preparation To first use the IR Remote control, you must first pull the battery insulation tape out Notes: • Remove the battery if the remote will not be used for a month or longer • Remove and dispose of battery properly Insert or replacing the Battery: Remove the battery holder Remove the battery from the battery holder Install the new battery Make sure to keep the (+) side up Insert the battery holder • CAUTION!!! Do not store battery with metallic objects or material
XDVD710 OPERATION Control Locations - Monitor Closed 1 2 4 3 5 6 16 15 14 13 12 11 10 9 8 1 Band 9 2 Auto Store/Preset Scan 10 Stop 3 Secondary LCD 11 Chapter/Track Up 4 Display 12 Chapter/Track Down 5 Open/Close Monitor 13 Fast Forward 6 Eject 14 Fast Reverse 7 Rotary Encoder/Enter 15 Mute 8 Mode 16 Power/Volume 7 Play/Pause/Scan Monitor Notes: • • • T his model incorporates a motorized moving monitor.
XDVD710 OPERATION Control Functions - Monitor Closed BAND AS/PS (Auto Store /Preset Scan) SECONDARY LCD Press BAND to increment from FM1, FM2, FM3, AM1] FM1. Press AS/PS momentarily to start station PRESET SCAN function, Press AS/PS for 2 seconds to start AUTO STORE station preset function in current BAND. Additional LCD for system information while monitor is closed. DISP Press the DISP button to display various information on the secondary LCD. OPEN Press OPEN to open or close the monitor.
XDVD710 OPERATION Control Locations - Monitor Open 1 2 3 4 5 1 Disc-in indicator - Red = Disc inserted, White = No disc. 2 ANGLE - Press to decrease the monitor view angle. 3 ANGLE - Press to increase the monitor view angle. 4 INFO - Press to select DVD INFO and press and hold for BRIGHTNESS. 5 Press to RESET system. Safety Notes: The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction.
XDVD710 OPERATION Control Functions - Monitor Open Disc-in indicator Monitor Angle pq White = No disc Red = Disc inserted Press ANGLE p to increase the monitor view angle. Press ANGLE q to decrease the monitor view angle. Notes: • Do not attempt to move the monitor up/down by hand - severe damage will occur. Use the front panel buttons or the remote control only. • The color of the LCD monitor varies between viewing angles. Select the angle with the most optimum view for your location.
XDVD710 OPERATION Control Locations - Remote 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 1 Mode 16 Info 31 Root 2 Mute 17 Search 32 Repeat 3 Open/Close 18 Key #0 33 Chapter/Track Down 4 Power 19 Band/Stop 34 Chapter/Track Up 5 Key #1 20 Audio Select 35 Fast Rewind 6 Key #2 21 Escape 36 Fast Forward 7 Key #3 22 4-Way - Up 37 Zoom 8 Volume Up 23 Menu 38 Audio 9 Key #4 2
XDVD710 OPERATION Control Functions - Remote Mode Press once to incrementally select desired source. Mute Press once to MUTE audio, press again to return audio. Open/Close Power Keys 0-9 Volume Up Volume Down Info Search Band/Stop Audio Select Escape 4-Way -Up/Down/Left/Right Menu Picture Ok Repeat A-B Title Menu Root Repeat Chapter/Track Down Chapter/Track Up Press once to open monitor, press again to close the monitor. Press once to turn the unit on, press again to turn unit off.
XDVD710 OPERATION General Operation Power On/Off Monitor Open/Close Press POWER momentarily to turn the unit on, the unit will beep 2 times. Press and hold POWER for more than 2 seconds, unit will beep 1 time, then turn off. Note: EJECT will still function even if POWER is off. Press OPEN to open or close the monitor. The unit will emit 1 confirmation beep when opening, 3 beeps when closing. Be careful not to not touch the monitor during the open/close sequence.
XDVD710 OPERATION General Operation Mode Press MODE to select between TUNER, DVD, AUX IN, XM, iPOD and CAMERA inputs. Modes of operation are indicated in the OSD (On Screen Display) and secondary LCD. Notes: XM tuner and/or iPod (both optional) must be connected to appear in the MODE selection string. Optional Mode Selection Volume Mute Audio Adjustment from front panel With the monitor open, press the top left corner of the screen to display the OSD menu.
XDVD710 OPERATION General Operation INFO/PIC RGB BRIGHTNESS CVBS Screen Controls SHARPNESS CONTRAST COLOR BRIGHTNESS TINT Note: Adjustments to SHARPNESS, CONTRAST, COLOR, BRIGHTNESS & TINT are only possible while in either iPod video playback, AUX-IN or CAMERA CVBS mode. Press INFO button for 1 second to display DVD disc information. Press and hold INFO for 2 seconds to change TFT LCD BRIGHTNESS: Press ANGLE p to increase, ANGLE q to decrease, or use VOLUME rotary to adjust the level up or down.
XDVD710 OPERATION General Operation BAND Press BAND to increment from FM1, FM2, FM3, AM1] FM1. AS/PS (Auto Store /Preset Scan) Press AS/PS momentarily to start station PRESET SCAN function. The unit will now scan your program presets for 10 seconds for each preset in that band. Press AS/PS again to stop scanning. Press AS/PS for 2 seconds to start AUTO STORE station preset function in current BAND.
XDVD710 OPERATION General Operation Secondary LCD Information 1 2 3 4 5 Note: Secondary LCD only functions when TFT monitor is closed. 1) LOC 2) ST 3) TIME 4) LOUD 5) SAT LOCAL indicator, icon will be off when DISTANCE (DX) is selected STEREO radio station indicator Displays TRACK time, TUNING frequency, MP3 ID3 info, & CLOCK, etc LOUDNESS selection indicator XM SATELLITE RADIO indicator Note: XM Radio requires an optional XM tuner and subscription, Visit www.xmradio.
XDVD710 OPERATION General Operation Main Menu Access There are three methods to access the MAIN menu • Press the ENTER button on the right ROTARY knob • Press the MENU button on the remote control • Touch the upper left corner of the touch screen 1 3 2 4 12 11 10 L 9 8 Touch Access Buttons 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) Rapid Dial 7 6 5 Touch to access AM/FM TUNER mode Touch to access CD/DVD mode, (CD/DVD must be inserted) Touch to access iPod mode, (iPod must be connected to activate)
XDVD710 OPERATION GENERAL Setup - Menu General Setup Menu L • • • Note: Default anti-theft password is 0000 Settings Default Radio USA Clock adjust Clock Mode AM 12Hr Camera Image Normal Video Format Auto TFT Auto Open Off Anti-theft Code Anti-theft active 0000 Off Press the GENERAL button to access the GENERAL setup mode Select desired parameter you wish to change Page will return back to previous screen after 10 seconds of inactivity or by pressing the RETURN button GENERAL Setup Menu ma
XDVD710 OPERATION GENERAL Setup - Adjusting Radio Frequency Adjusting Radio Frequency L 1 Step 1 1) Touch top left corner of screen L 2 Step 2 2) Touch GENERAL setup button L 3 Step 3 3) Touch USA L L 5 4 Step 4 4) Touch the setting for your region Step 5 Touch RETURN to exit 22
XDVD710 OPERATION GENERAL Setup - Adjusting the Clock 12Hr Clock Mode L 1 Step 1 1) Touch top left corner of screen L 2 Step 2 2) Touch GENERAL setup button L 3 Step 3 3) Touch 00:00 area in the CLOCK row L 7 L L L 8 5 6 Steps 4-8 4) Keypad should now appear 5) Enter HOURS, touch ok 6) Enter MINUTES, touch ok 7) Touch AM or PM to set 8) Touch RETURN to exit 24Hr Clock Mode 23 If you desire 24Hr format, select 24Hr from CLOCK MODE, then follow steps 1-8.
XDVD710 OPERATION GENERAL Setup - Setting the Anti-theft code By default Anti-theft password is 0000 and is turned Off. To turn this feature on, follow the steps below. CAUTION!! This will lock your unit from operating if battery POWER is disconnected for more than 5 minutes.
XDVD710 OPERATION SCREEN Setup - Menu Screen Setup Menu • • • L Press the SCREEN button to access the SCREEN setup mode Select desired parameter you wish to change Page will return back to previous screen after 10 seconds of inactivity or by pressing the RETURN button SCREEN Setup Menu matrix Settings Default Options Brightness 10 0 - 20 Screen Tilt Screen Saver 4 On TS Calibrate No 1-6 Off On No Yes Version Function Press the or buttons on the remote or press the right rotary once and
XDVD710 OPERATION SCREEN Setup - Setting TFT Brightness This will set the default setting for the TFT display brightness. This can also be set by pressing the INFO button on the front TFT panel.
XDVD710 OPERATION SCREEN Setup - Setting TFT Angle Set for best viewing angle in your vehicle L 1 Step 1 1) Touch top left corner of screen Step 2 L 2 2) Touch SCREEN setup button L 3 Step 3 3) Touch a number displayed in SCREEN TILT row L L 5 4 Step 4 4) Touch desired angle for best viewing angle 1 - 6 is possible Default = 4 Step 5 27 5) Touch RETURN to exit
XDVD710 OPERATION SCREEN Setup - Touch Screen Calibration On occasion, the touch screen will have to be calibrated. Follow these steps as described. L 1 Step 1 1) Touch top left corner of screen Step 2 L 2 2) Touch SCREEN setup button LL 3 Step 3 & 4 4 3) Touch No in TS Calibration row 4) Then touch Yes L 5 Note: For proper calibration you must touch each pointer for 2 seconds. If pointers are not touched properly, the calibration sequence will start over until the calibration is done correctly.
XDVD710 OPERATION AM/FM Tuner Operation AM/FM Tuner TFT Display 2 1 3 4 19 5 18 6 L 17 16 15 29 14 13 12 11 7 10 9 8 1) Current MODE information, touch upper left area to return to MAIN MENU 2) Current PRESET station indicator 3) STEREO broadcast indicator 4) Clock 5) PRESET page up 6) LOCAL/DISTANCE selection 7) PRESET page down 8) Auto station SCAN button 9) MANUAL TUNE up 10) MANUAL TUNE down 11) SEEK TUNE up 12) SEEK TUNE down 13) AS/PS (AUTO STORE/PRESET S
XDVD710 OPERATION AM/ FM Tuner Operation Auto Seek Tuning Manual Tuning Auto Store (AS) Press the button to auto SEEK up the next strongest station. Press the button to auto SEEK down the next strongest station. Press the button to manually tune up one step at a time. Press the button to manually tune down one step at a time. Press and hold AS/PS for more than 2 seconds to automatically store the twelve strongest stations in the current band.
XDVD710 OPERATION WARNING Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage.
XDVD710 OPERATION DVD Operation - Parking Brake Initialization SAFETY WARNING CAUTION !!! IT'S UNLAWFUL TO OPERATE A VEHICLE WHILE VIDEO IS DISPLAY IN THE DRIVERS VIEWING AREA ENGAGE EMERGENCY BRAKE TO ENJOY VIDEO Front TFT Video Initialization • The video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash video functions will only operate when vehicle is in Park and the PARKING BRAKE is engaged.
XDVD710 OPERATION DVD Operation DVD Region Management Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the XDVD710 plays discs according to their intentions, some functions may not work as intended. Please be sure to read the instructions provided with each disc. This player has been designed to play back DVD software that has been encoded for specific region areas.
XDVD710 OPERATION DVD Operation - Inserting a Disc DVD Loading Slot Eject button Insert CD/DVD with label facing upwards Inserting a Disc When inserting a DVD disc, usually it will play automatically. Other sub-menus may have to be pressed to access the DVD movie/music content. Read the directions of your specific DVD disc for other features. Note: If PARENTAL Lock is activated and the disc inserted is not authorized, a 4-digit code must be entered and/or the disc be authorized.
XDVD710 OPERATION DVD Operation - Touch Screen Controls Hidden Touch Screen area while in TUNER mode There are several hidden TOUCH SCREEN areas outlined below: "A" area can be used in any mode to access MAIN menu L Hidden Touch Screen areas while in DVD mode "A-F" areas can be used in DVD mode to access: A - Displays MAIN menu B - Displays DVD track information C - Selects PREVIOUS chapter D - Selects NEXT chapter E - Displays the full DVD transport controls F - GOTO search menu L 35
XDVD710 OPERATION DVD Operation - Touch Screen Controls Using the hidden Touch Screen Controls A - Displays MAIN menu B - Displays DVD track information C - Selects PREVIOUS chapter D - Select NEXT chapter E - Displays the full DVD transport controls F - GOTO search menu L L AREA A Access MAIN Menu AREA B Displays Track Information AREA C Selects PREVIOUS Track AREA D Selects NEXT Track Note: A DVD disc must be inserted to access these functions and features.
XDVD710 OPERATION DVD Operation - Touch Screen Controls Using the hidden Touch Screen Controls DVD Transport Control OSD L Touch AREA E 1) Touch the PLAY button or on the front panel to resume disc playback 2) Touch the PAUSE button again to suspend the disc playback 3) Touch button to STOP playback, touch resume playback 4) Touch the REVERSE button to FAST REVERSE on DVD, 2x, 4x, 8x to 20x 5) Touch the FORWARD button to FAST FORWARD on DVD, 2x, 4x, 8x to 20x 6) Touch the REPEAT to scroll
XDVD710 OPERATION DVD Operation - Searching a DVD Searching a DVD L Searching by Time, Title or Chapter Touch the top right screen - AREA F Search by TIME example 1) Touch the in the TIME area 2) A touch keypad will now appear, enter your desired TIME to search 3) Press ok Notes: Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the XDVD710 plays discs according to their intentions, some functions may not work as intended.
XDVD710 OPERATION DVD Operation Direct Chapter / Track Selection During DVD and CD playback, you can use the numeric keypad on the remote control to access tracks directly. Viewing an Alternate picture Angle (DVD only) Some DVD's contain scenes that have been shot simultaneously from different angles. For discs recorded with multiple angles, press the ANGLE button on the remote control to toggle between available angles.
XDVD710 OPERATION DVD Setup Menu - Language LANGUAGE Setup Menu Note: A DVD disc must be inserted to access these functions and features. With the monitor open in DVD mode, press the AREA A (top left screen) to display the MAIN menu. Press DVD Setup to access the DVD setup menu.
XDVD710 OPERATION DVD Setup Menu - Video Video Setup Menu Note: A DVD disc must be inserted to access these functions and features. With the monitor open in DVD mode, press the AREA A (top left screen) to display the MAIN menu. Press DVD Setup to access the DVD setup menu.
XDVD710 OPERATION DVD Setup Menu - Rating Rating Setup Menu Note: A DVD disc must be inserted to access these functions and features. With the monitor open in DVD mode, press the AREA A (top left screen) to display the MAIN menu. Press DVD Setup to access the DVD setup menu. L L Press RATING icon to select from the following menus: Enable Parental Lock Password Press ---- to enter a password, then press Ok Setting Parental Lock Password Rating Setting L L L 1. Enter a 4-digit code 2.
XDVD710 OPERATION CD Operation CD User Interface 43 1) Current MODE information, touch upper left area to return to MAIN MENU 2) Disc title 3) Track title 4) Current TIME 5) Touch to PLAY/PAUSE disc playback 6) Touch to STOP disc playback 7) Touch to PAGE down 8) Touch to PAGE up 9) Touch to FAST REVERSE current track 10) Touch to FAST FORWARD current track 11) Touch to SCAN CD tracks for 10 seconds each track, touch again to deactivate 12) Touch to activate/deactivate REPEAT: Sing
XDVD710 OPERATION CD Operation Playing CD-DA discs After inserting a CD disc, files will play in numerical order in the directory. L Selecting by Keypad Touch to display keypad. Enter desired track number and press ok. L Selecting by Direct Track Access Touch desired track for DIRECT TRACK access. L L Previous/Next Page Touch to view UP/DOWN pages of available TRACKS.
XDVD710 OPERATION MP3/WMA Operation MP3/WMA User Interface 45 1) Current MODE information, touch upper left area to return to MAIN MENU 2) Disc title 3) Track title 4) Current TIME 5) Touch to PLAY/PAUSE disc playback 6) Touch to STOP disc playback 7) Touch to PAGE down 8) Touch to PAGE up 9) Touch to PREVIOUS FOLDER 10) Touch to NEXT FOLDER 11) Touch to FAST FORWARD MP3 tracks, touch PLAY to deactivate 12) Touch to activate/deactivate REPEAT: Single mode 13) Touch to activate/de
XDVD710 OPERATION MP3/WMA Operation Playing MP3/WMA files After inserting an MP3/WMA disc, files will play in numerical order in the directory. L Selecting by Single Track Touch to display keypad. Enter desired track number and press ok. L Selecting by Direct Track Access Touch desired track for DIRECT TRACK access. L L Previous/Next Page Touch to view UP/DOWN pages of available TRACKS.
XDVD710 OPERATION Media Compatibility Media Compatibility The following types of discs/files are compatible: • CD-ROM (ISO), CD-R, CD-RW, DVD+R/RW, DVD-R/RW • CD-DA, DVD Video • MP3 data • WMA data The following types of discs/files are not compatible: • WMA files that are protected by DRM (Digital Rights Management) • WMA lossless format • Discs recorded with Track At Once or packet writing • MP3 PRO format • MP3 playlists • WAV format • WMV format • JPG format • DivX format • AVI format • MPG format Som
XDVD710 OPERATION Media Compatibility Additional MP3/WMA Information An internal buffer provides ESP (Electronic Skip Protection) to virtually eliminate skipping. When playing a disc recorded with regular audio files (CD-DA or .WAV) and MP3/WMA files, the unit will play the MP3/WMA files only. Only MP3 files with filename extension (.mp3) can be played. Only WMA files with filename extension (.wma) can be played. Do not attempt to play discs which contain non-MP3/WMA files with the MP3/WMA extension.
XDVD710 OPERATION iPod Operation (Optional) iPod User Interface 49 1) Current MODE information, touch upper left area to return to MAIN MENU 2) Artist name 3) Track title 4) Current TIME 5) Touch to PLAY/PAUSE iPod playback 6) Touch to STOP iPod playback 7) Touch to PAGE down 8) Touch to PAGE up 9) Touch to FAST REVERSE current song 10) Touch to FAST FORWARD current song 11) Touch to SCAN SONGS for 10 seconds each, touch again to deactivate 12) Touch to wait for iPod VIDEO or PHOTO
XDVD710 OPERATION iPod Operation (Optional) Playing iPod files After connecting an iPod, files will play in numerical order in the directory. To select iPod mode, press the MODE button on the front panel, remote control, or press the iPod icon on the MAIN menu. L Selecting by Keypad Touch to display keypad. Enter desired song number and press ok. L Selecting by Direct Song Access Touch desired song for DIRECT SONG access. L L Previous/Next Page Touch to view UP/DOWN pages of available SONGS.
XDVD710 OPERATION iPod Operation (Optional) Playing photo or video files from iPod Notes: VIDEO/PHOTO FILES are only compatible with G5 iPod. The iPod photo/video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. iPod photo/video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.
XDVD710 OPERATION iPod Operation (Optional) Selecting Music By: Playlist Artist Album Genre Song L Touch desired Folder, music will begin to play after selection. Rapid Dial RAPID DIAL can also control iPod touch screen functions • • • Character Support Select desired item by rotating clockwise or counter-clockwise Item will be outlined in blue Press to confirm/ENTER Only alphanumeric characters can be displayed (ASCII type).
XDVD710 OPERATION XM Activation (Optional) Activating Your XM Tuner (when connected) 1. Press MODE to select XM Radio. 2. Verify channel 1 (XM Preview Channel) is playing. 3. Select Channel 0. The XM tuners' eight character Radio ID number will appear on the XDVD710 display. The Radio ID number is also located on the XM tuner (sold separately). 4. Record the number here for future reference: 5. Activate your XM Satellite Radio service by logging on to http://www.xmradio.
XDVD710 OPERATION XM Radio Operation (Optional) Tuning Modes Touch Channel Selection Touch Storing and Recalling Preset Channels to select between XM, XM1. XM2 and XM3 bands. momentarily to select the next available channel. Up to 48 XM channels can be stored. To store a channel, select XM1, XM2 or XM3 band and the desired channel. Press and hold the desired channel name for more than 2 seconds.
XDVD710 WARRANTY Limited One Year Warranty This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase. Dual Electronics Corp.
XDVD710 OPERATION Troubleshooting Problem Unit will not turn on (no power) Cause Action Yellow wire not connected or incorrect voltage Check connections for proper voltage (11~16VDC) Red wire not connected or incorrect voltage Black wire not connected Check connection to ground Fuse blown Replace fuse Unit has power (but no sound) Speaker wires not connected Check connections at speakers One or more speaker wires touching each other or touching chassis ground Insulate all bare speaker wires from
XDVD710 OPERATION Specifications DVD Player Frequency response: 10Hz-20kHz Channel separation @ 1kHz: >65dB D/A converter: 24 Bit FM Tuner Tuning range: 87.5MHz-107.9MHz Usable sensitivity: 8.5dBf 50dB quieting sensitivity: 10dBf Stereo separation @ 1kHz: 40dB Frequency response: 30Hz-13kHz AM Tuner Tuning range: 530kHz-1710kHz Usable sensitivity: 22uV Frequency response: 30Hz-2.2kHz Monitor Panel size: 7” (177.
XDVD710 OPERATION Notes 58
Dual Electronics Corp. Toll Free: 1-866-382-5476 www.dualav.com ©2006 Dual Electronics Corp. All rights reserved. NSA1106-V02.
