Operation Manual
- 47 -
tion, press M button. You return to aps
menu.
If you press M button after autoset is
started, program table appears on the
screen.
0! 2.!
If OK button is pressed, autoset function
starts and the following menu comes to the
screen.
After autoset is finalized, the program table
comes to the screen.
programming menu
By pressing / button in tv tuner
menu select the first icon. Programming
menu appears on the screen.
program
By pressing
/ button, select pro-
gram. "right/left to select program" is seen
on the screen. By pressing / button,
you can select the program number. You
can also enter a number via digit buttons on
the remote control. There are 100 program
storage between 0 and 99.
fine tune
By pressing
/ button, select fine
tune. "right/left to adjust fine tuning" is
seen on the screen. By pressing /
button, you can adjust the tuning. The adjust
values are between -50 and +50.
channel
By pressing / button, select channel.
"right/left to change channel" is seen on
the screen. By pressing / button, you
can change the channel number. You can
also enter a number via digit buttons on the
remote control. The adjust values change
according to the standard and channel type.
standard
By pressing / button, select stan-
dard. "right/left to change standard" is
seen on the screen. By pressing /
button, you can change the standard to B/G,
D/K, I or L/L'.
channel type
By pressing / button, select channel
type. "right/left to change channel type" is
seen on the screen. By pressing
/
button, you can change the channel type to C
or S.
edit labels
By pressing
/ button, select edit la-
bels. "right/left to edit labels" is seen on
the screen. By pressing
/ or OK
button, you can enter the following menu.
/ or / buttons are used to edit
labels.
store program
By pressing
/ button, select store
program. "right/left to store program" is
seen on the screen. By pressing / or
02-ENG-2707W-1546UK-27 INCH TFT-(CHI MEI)(10 PAGE)-50060777.p65 15.12.2004, 11:3647