XR8 SPOT Z60 User’s Manual Rel 1.2 GB D.T.S. Illuminazione srl - ITALY http://www.dts-lighting.
XRARC 8 SPOT 1200 Le informazioni contenute in questo documento sono state attentamente redatte e controllate. Tuttavia non è assunta alcuna responsabilità per eventuali inesattezze. Tutti i diritti sono riservati e questo documento non può essere copiato, fotocopiato, riprodotto per intero o in parte senza previo consenso scritto della D.T.S. DTS si riserva il diritto di apportare senza preavviso cambiamenti e modifiche estetiche , funzionali o di design a ciascun proprio prodotto. D.T.S.
XRARC 8 SPOT 1200 INDEX: 1- TECHNICAL FEATURES 2- IMPORTANT SAFETY INFORMATION 4 5 2.1 Fire prevention 2.2 Prevention of electric shock 2.3 Protection against ultraviolet radiation 2.4 Safety 2.5 Level of protection against the penetration of solid and liquid matter 3- MOUNTING THE LAMP 6 3.1 Lamp alignment 4- VOLTAGE AND FREQUENCY 5- INSTALLATION 7 7 5.1 Safety cable 5.2 Protection against liquids 5.3 Movement 5.4 Risk of fire 5.5 Forced ventilation 5.
XRARC 8 SPOT 1200 1- TECHNICAL FEATURES The XR 8 Spot is fitted with a Philips MSR 575/2 discharge lamp (GX9,5 lampholder base), with a colour temperature of 7,200 °K and a luminous flux of 49,000 Lumens. Duration is 750 hours, with replacement recommended before 1000 hours Other recommended lamps: Philips 575 MSD (6.000K°-49.000 Lumens-3.
XRARC 8 SPOT 1200 2- IMPORTANT SAFETY INFORMATION 2.1 Fire prevention: XR8 uses a Philips 575 MSR/2 or MSD The use of any other alternative lamp is not recommended and will null and void the fixture's warranty. -Never locate the fixture on any flammable surface. -Minimum distance from flammable materials: 1 MT. -Minimum distance from the closest illuminable surface: 2 MT. -Replace any blown or damaged fuses only with fuses of identical value. Refer to the wiring diagram if there is any doubt.
XR 8 SPOT 6 3- MOUNTING THE LAMPS Warning: Switch off the unit before replacing the lamp. Philips 575 MSR/2 Power 575W Luminous flux 49,000 lm Colour temperature 7.200°K Lampbase GX9,5 Rated life 1,000 hours Philips 575 MSD Power 575W Luminous flux 43,000 lm Colour temperature 6.000°K Lampbase GX9,5 Rated life 3,000 hours 1) Using a screwdriver, remove the 3 screws A,B, C, (photo 1) which fix the lamp holder. Photo 1 Photo 2 Photo 3 Photo 4 2) Remove the lamp holder assembly (photo2).
XR 8 SPOT 4- VOLTAGE AND FREQUENCY The XR8 with electronic ballast can operate at 90-245 VOLT 50 or 60 Hz. The XR8 with electromagnetic ballast can operate at 230 V 50-60 Hz(Standard) On request: 100 V 50-60 Hz /120 V 60 HZ / 208 V 60 Hz 5- INSTALLATION XR8 may be either floor or ceiling mounted. For floor mounting installations, the XR8 is supplied with four rubber mounting feet on the base.
XR 8 SPOT 8 5.3- Movement The projector has a maximum movement of 540° for Pan and 270° for Tilt. DO NOT place any obstructions in the path of the projector's movement. 270° 540° 5.4- Risk of fire Each fixture produces heat and must be installed in a well-ventilated place. The minimum recommended distance from flammable material is 1 MT. Minimum distance from the object being illuminated is 2 MT. 5.
XR 8 SPOT Ensure that the conductors do not touch each other.Do not connect the cable ground to the XLR chassy The plug housing must be isolated. Connect the mixer signal to the DMX IN projector plug and connect it to the next projector by connecting the DMX OUT plug on the first projector to the DMX IN plug of the second one. In this way, all the projectors are cascade connected. NB.
XR 8 SPOT 7.1-DMX Addresses XR8 can be used in two different modes: 16 or 20 DMX (default) channels. If you want to use the XR8 in 16 channels mode, select the 16 CH mode from the MODE menu and set the following addresses on the mixer: Projector 1 Projector 2 A001 A017 Projector 3 ….. projector 6 A033 A….
XR 8 SPOT 11 8- DISPLAY FUNCTIONS MAINS Electronic ballast 90-245V 50 / 60Hz Electromagnetic ballast 230 V 50/60 Hz (standard) On request: 100 V 50-60 Hz 120 V 60 HZ / 208 V 60 Hz DISPLAY DMX IN DMX OUT UP MENU DOWN ENTER DISPLAY FUNCTIONS The XR8 display panel shows all the available functions . Using these functions, it is possible to change some of the parameters and add some functions.
XR 8 SPOT 12 8- DISPLAY FUNCTIONS MENU Up-Down ENTER Up-Down TEST MODE Full test and single function test. MENU Up-Down GOBO SHAKE ALL PAN TILT EFFECTS ROT. DIMMER COLOR SHUTTER FOCUS GOBO ZOOM GOBO ROT.
XR 8 SPOT 13 8- DISPLAY FUNCTIONS MENU Up-Down ENTER ON / OFF VIA DMX (default) Up-Down ENTER LAMP Lamp always ON-always OFF Or lamp ON-OFF selectable via DMX ENTER ENTER ADJUST To adjust the lamp with no mixer connected. It’s possible to set the parameters for PAN-TILT and FOCUS ENTER ACC Lamp strikes counter MENU Up-Down FORCED ON FORCED OFF Up-Down ENTER Up-Down ENTER ENTER ENTER REC Record mode MENU Up-Down ENTER ENTER Up-Down Slave Slave mode as run by GAM.
XRARC 8 SPOT 1200 14 9- AUTOMATIC MODE (auto) XR8 can work in automatic mode without a DMX controller. First of all connect the projectors with a DMX cable (picture below). MASTER OUT SLAVE 1 IN OUT SLAVE 2 IN OUT To activate Auto mode on the first unit, use the menu to run through the different modes until AUTO appears on the display, at this point press enter. Now it is possible to select the Game P which is user programmable through REC mode. To confirm game activation press ENTER. 9.
XRARC 8 SPOT 1200 The three new DMX channels are: -Scene channel -From 0-255 are displayed the programmable scenes (max 16 scenes M.001 M016) -View channel: -From 1-19 the unit runs the scene that has been saved in the unit memory and it is possible to play through the other scenes using the scene channel. -From 20-235 the unit runs the configuration given by the received input DMX values.
XRARC 8 SPOT 1200 16 13- HIDDEN MENU For technical personnel only. To operate this menu: -Connect the projector to the DMX controller (DMX SIGNAL MUST BE CORRECTLY RECEIVED) - Reset the XR8 (reset from the MENU, not from the DMX controller!). - While reset is running, press the MENU and ENTER keys at the same time. Electronic calibration of the motors. Reset EEPROM (Reset all settings. ATTENTION: by pressing this key you must repeat all previous calibrations) Exit from hidden menu.
XR 8 SPOT 17 14- OPENING THE PROJECTOR HOUSING It is possible to inspect the inside of the projector by removing the cover as indicated below. ATTENTION REMOVE MAINS POWER PRIOR TO ACCESSING THE PROJECTOR’S INTERNAL COMPONENTS. 1) Loosen the 3 (1/4 turn) screws which fix the head covers (photo 1) . 2) Once unscrewed, simply lift the covers to access the internal components (photo 2).
XR 8 SPOT 16- PERIODIC CLEANING 16.1- Lenses and reflectors Even a fine layer of dust can substantially reduce the luminous output . Regularly clean all lenses and the reflector using a soft cotton cloth, dampened with a specialist lens cleaning solution. 16.2- Fans and air passages The fans and air passages must be cleaned approximately every 6 weeks. This periodic cleaning will depend of course, on the conditions in which the projector is operating.
XRARC 8 SPOT 1200 19 18- DMX PROTOCOL 16 CHANNELS MODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PAN msb 540° PAN lsb TILT msb 270° TILT lsb SPEED MOVEMENT DIMMER SHUTTER COLOUR COLOUR PROPORTIONAL (Priority in color channel) GOBO GOBO ROTATION PRISM/PRISM ROTATION FOCUS ZOOM FROST (Priority on Zoom channel) LAMP ON-OFF / RESET DMX CHANNEL 1 Parameter: PAN msb DMX CHANNEL 2 Parameter: PAN lsb DMX CHANNEL 3 Parameter: TILT msb DMX CHANNEL 4 Parameter: TILT lsb DMX CHANNEL 5 Parameter: MOVEMENT
- XRARC 8 SPOT 1200 - 20 0-8 9-255 DMX CHANNEL 4 7 Black-out Proportional dimmer Parameter: SHUTTER DMX range Value Mid point DMX value 0-9 10-23 24-37 38-51 52-65 66-79 80-93 94-107 108-121 122-135 136-149 150-163 164-177 178-191 192-205 206-219 220-227 228-233 234-255 5 16 30 44 58 72 86 100 114 128 142 156 170 184 198 212 225 230 244 DMX CHANNEL 8 Move range (degrees) Mode Option Function Black-out StrobE random speed Strobe speed 1 min.
- XRARC 8 SPOT 1200 21 165-175 176-186 187-197 198-200 201-203 204-206 207-209 210-212 213-215 216-218 219-221 222-224 225-228 229-231 232-234 235-237 238-240 241-243 244-246 247-249 250-252 253-255 DMX CHANNEL 170 181 192 199 200 205 208 211 214 217 220 223 226 230 233 236 239 242 245 248 251 254 9 Bicolour 8/9 Colour9 Bicolour 9/1 Right rotation speed 1 min.
- XRARC 8 SPOT 1200 22 244-249 250-255 DMX CHANNEL DMX range Value 0-127 128-180 181-202 203-255 DMX CHANNEL 246 252 11 Speed rotation 7 Speed rotation 8 max.
- XRARC 8 SPOT 1200 23 DMX CHANNEL 16 Parameter: RESET DMX range Value Mid point DMX value 0-9 10-60 61-129 130-179 180-200 201-239 240-255 5 30 95 154 190 220 247 Move range (degrees) Mode Option Function No Effect Lamp OFF (Active after 3 seconds) No Effect Lamp ON (Active after 3 seconds) No Effect Internal Motors Reset Total Reset
XR 8 SPOT 24 20 CHANNELS MODE (DEFAULT) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 PAN msb 540° PAN lsb TILT msb 270° TILT lsb P/T SPEED MOVEMENT DIMMER SHUTTER COLOUR COLOUR MODE GOBO GOBO MODE GOBO ROTATION-INDEX GOBO ROTATION-INDEX FINE GOBO SHAKE PRISM PRISM ROTATION FOCUS ZOOM FROST (Priority on Zoom channel) LAMP ON-OFF / RESET DMX CHANNEL 1 Parameter: PAN msb DMX CHANNEL 2 Parameter: PAN lsb DMX CHANNEL 3 Parameter: TILT msb DMX CHANNEL 4 Parameter: TILT lsb DMX CHANNEL 5 Par
XR 8 SPOT 25 DMX CHANNEL 6 Parameter: DIMMER DMX range Value Mid point DMX value 0-8 9-255 4 DMX CHANNEL DMX range Value 7 Move range (degrees) Mode DMX range Value 0-27 28-55 56-83 84-111 112-139 140-167 168-195 196-223 224-255 Function Black-out Linear dimmer Parameter: SHUTTER Mid point DMX value Move range (degrees) Mode 0-19 20-39 40-59 60-79 80-89 90-99 100-109 110 -119 120-129 130-139 140-149 150-159 160-169 170-179 180-189 190-199 200-209 210-219 220-227 228-233 234-255 DMX CHANN
XR 8 SPOT 26 DMX CHANNEL DMX range Value 0-25 26-51 52-77 78-103 104-129 130-155 156-181 182-207 208-233 234-255 0-10 11-255 0-9 10-127 128-137 138-255 DMX CHANNEL DMX range Value 8 Parameter: COLOUR Move range Mode Option Function (degrees) IF CHANNEL 9 = HALF COLOUR (Dmx range value 64 - 127) No Colour Bicolour ½ Bicolour 2/3 Bicolour 3/4 Bicolour 4/5 Bicolour 5/6 Bicolour 6/7 Bicolour 7/8 Bicolour 8/9 Bicolour 9/1 IF CHANNEL 9 = PROPORTIONAL COLOUR (Dmx range value 128 - 191) No Colour Proportiona
XR 8 SPOT 27 DMX CHANNEL DMX range Value 10 Parameter: GOBO Mid point DMX value Move range (degrees) Mode Option Rotation speed 2 Rotation speed 3 Rotation speed 4 Rotation speed 5 Rotation speed 6 Rotation speed 7 Rotation speed 8 Max 214-219 220-225 226-231 232-237 238-243 244-249 250-255 DMX CHANNEL DMX range Value 11 Parameter: GOBO MODE Mid point DMX value Move range (degrees) Mode Option DMX CHANNEL 12 DMX range Value Mid point DMX value Parameter: GOBO ROTATION/GOBO INDEX Move
XR 8 SPOT 28 DMX CHANNEL DMX range Value 14 Parameter: GOBO SHAKE Mid point DMX value Move range (degrees) Mode Option Gobo Shake R-L Speed 4 Gobo Shake R-L Speed 5 Gobo Shake R-L Speed 6 Gobo Shake R-L Speed 7 Gobo Shake R-L Speed 8 Gobo Shake R-L Speed 9 Max Stop Gobo Shake L-R Speed 1 Min Gobo Shake L-R Speed 2 Gobo Shake L-R Speed 3 Gobo Shake L-R Speed 4 Gobo Shake L-R Speed 5 Gobo Shake L-R Speed 6 Gobo Shake L-R Speed 7 Gobo Shake L-R Speed 8 Gobo Shake L-R Speed 9 Max 49-61 62-74 75-87 88-
XR 8 SPOT 29 DMX CHANNEL DMX range Value 18 Parameter: ZOOM Mid point DMX value Move range (degrees) Mode Option 11° 15° 18° 0-84 85-170 171-255 DMX CHANNEL DMX range Value 19 Parameter: FROST Mid point DMX value Move range (degrees) Mode Option Function No Effect Frost 0-127 128-255 DMX CHANNEL Function 20 Parameter: LAMP / RESET DMX range Value Mid point DMX value 0-9 10-60 61-129 130-179 180-200 201-239 240-255 5 30 95 154 190 220 247 Move range (degrees) Mode Option Functio
- XRARC 8 SPOT 1200 30 19- GOBO WHEEL 4 5 3 6 2 7 1 GOBO 1 DICHROIC GOBO 2 DICHROIC 0516G029.02 0516G029 GOBO 3 DICHROIC 0516G029.01 GOBO 4 METAL GOBO 5 METAL GOBO 6 METAL GOBO 7 METAL 0516G030.01 0516G030.02 0516G030.03 0516G030.
- XRARC 8 SPOT 1200 31 20- COLOUR WHEEL 3 2 4 1 5 6 8 7 COL1 0507C043.D01 LAVANDER SL0064 COL5 0507C052.D01 PINK SL4761 COL2 COL3 COL4 0507C051.D01 ORANGE LW590 0507C042.D01 GREEN WB5055 0507C045.D01 CYAN SW 530 COL7 COL8 0507C049.D01 YELLOW LW 515 0507C047.D01 RED LW 640 COL6 0507C041.
XR 8 SPOT 21- MOTORS CONTROL CARD Display 8 MOTORS PCB J7 Magnetic Sensors Connector Line 1 Brown Line 2 Orange Gobo (BLACK) GND ORANGE BROWN VCC Focus (DARK GREEN) Strobe (YELLOW) J9 from J3 Lamp ON-OFF control card J1 Internal DATA Communication Connector From J8 Pan & Tilt card Prism (PINK) + Zoom 30 VDC (GREY) Gobo rotation (LIGHT BLUE) Prism rotation (GOLD) Colour (BLUE) Fans
XRARC 8 SPOT 1200 33 22-PAN & TILT CARD PAN (WHITE) TILT (BROWN) GND (BLACK) 30 VDC (RED) FAN (WHITE) ENCODER PAN (RED) MOTOR TILT (BROWN) DATA 2 (LIGHT GREEN) DATA 1 (VIOLET) ENCODER TILT (ORANGE) TO J2 LAMP ON-OFF CARD TO J1 DISPLAY CARD (WHITE) TO J1 8 MOTORS CARD (GREEN) DMX INPUT (WHITE) 23-CABLES RESEND CARD ENCODER TILT (ORANGE) DISPLAY 2 DISPLAY 1 24-DISPLAY CARD FROM J12 P&T PCB BLACK RED BLACK BLACK IN LAMP 25-LAMP ON-OFF CONTROL CARD V1 OUT LAMP CN7 If the PCB card do
XRARC 8 SPOT 1200 34 26- WIRING DIAGRAMS P N GND FUSE 6,3A F PAN & TILT 1A EMC FILTER TO J1 8 MOTORS CARD (GREEN) 230V/50Hz 0 DMX INPUT (WHITE) 24V 0 + RELAY BOARD PFC 60ÏF (power factor corrector) BALLAST 600W 50Hz BRIDGE RECTIFIER 25A 60Hz ENCODER PAN (RED) ENCODER TILT (ORANGE) TO J1 DISPLAY CARD (WHITE) TO J2 LAMP ON-OFF CARD 125VA BIMETALLIC THERMOSTAT 180°C 8 MOTXR8 BIMETALLIC THERMOSTAT 180°C BLACK D RED BLACK IGNITOR 575W N BLACK LP LAMP MSR575/2 6 FROM J12 PAN&
NOTES XR 8 SPOT
The information contained in this publication has been carefully prepared and checked. However, no responsibility will be taken for any errors. All rights are reserved and this document cannot be copied, photocopied or reproduced, in part or completely, without prior written consent from D.T.S. D.T.S. reserves the right to make any aesthetic, functional or design modifications to any of its products without prior notice. D.T.S.