Manualshelf

User Manual

ManualsBrandsDTC Communications ManualsElectronicsSurveillance Transmitter for Law Enforcement
11121314151617181920
USB Port
1
2
3
PROGRAMMING
DTC COMMUNICATIONS, INC.
15
1. Ensure that your transmitting antenna is connected
to the TX.
2. Use fresh batteries or connect a suitable DC power
source.
3. Install one end of the USB programming cable to the
USB connector on the TX.
4. Connect the other end of the USB programming
cable to an available USB port on your computer.
5. Launch the Universal Programmer application.
The Connect Device Dialog box displays. It
will automatically close when the new device is
recognized.
6. Windows should automatically detect the new device
with removable drive after several seconds. Windows
Explorer should display the new removable drive
icon.
Battery Pack