MSDS

MATERIAL SAFETY DATA SHEET

PRODUCT NAME: DRYLOK CLEAR MASONRY WATERPROOFER HMIS CODES: H F R P

PRODUCT CODE: 209 1 0 0

SECTION I – MANUFACTURER IDENTIFICATON

MANUFACTURE’S NAME: UNITED GILSONITE LABORATORIES EMERGENCY PHONE: (800) 424-9300

ADDRESS: 1396 JEFFERSON AVENUE

SCRANTON, PA 18509 INFORMATION PHONE: (570) 344-1202

NAME OF PREPARER: R. BARAKO

DATE ISSUED: JANUARY 2014

SUPERCEDES:

SECTION II – HAZARDOUS INGREDIENTS/SARA III INFORMATION

OCCUPATIONAL EXPOSURE LIMITS VAPOR PRESSURE WEIGHT

HAZARDOUS COMPONENTS CAS NUMBER OSHA PEL ACGIH TLV OTHER mmHg@TEMP PERCENT

WATER 7732-18-5 NOT ESTAB NOT ESTAB NOT ESTAB 1.0 (68F) 65.50

DIETHYLENE GLYCOL DIBENZOATE 120-55-8 NOT ESTAB NOT ESTAB NOT ESTAB <1 (68F) 1.40

PROPANOL,OXYBIS-DIBENZOATE 27138-31-4 NOT ESTAB NOT ESTAB NOT ESTAB <1 (68F) 1.40

ACRYLIC COPOLYMER NOT ESTAB NOT ESTAB NOT ESTAB NOT ESTAB N/A 28

2-PROPANOL,1-(2-BUTOXY-1-

METHYLETHOXY) 29911-28-2 NOT ESTAB NOT ESTAB NOT ESTAB .06 (68F) 1.50

TETRAMETHYYL-5-DECYNE-4-7-

DIOL 126-86-3 NOT ESTAB NOT ESTAB NOT ESTAB N/A 0.50

3-LODO-2-PROPYNYBUTYL-

CARBAMATE 55406-53-6 NOT ESTAB NOT ESTAB NOT ESTAB N/A 0.10

1,2-BENZISOTHIAZOLIN-3-ONE 2634-33-5 NOT ESTAB NOT ESTAB NOT ESTAB N/A 0.10

DIPROPYLENE GLYCOL MONO-

METHYL ETHER 34590-94-8 100 PPM 100 PPM NOT ESTAB N/A 1.50

SECTION III – PHYSICAL/CHEMCIAL CHARACTERISTICS

BOILING RANGE: 212 F SPECIFIC GRAVITY (H20 =1) 1.02

VAPOR DENSITY: HEAVIER THAN AIR EVAPORATION RATE: SLOWER THAN ETHER

COATING VOC: LESS THAN 100 G/L

SOLUBILITY IN WATER: SOLUBLE

APPEARANCE AND ODOR: MILKY APPEARANCE, TYPICAL AMINE ODOR

SECTION IV – FIRE AND EXPLOSION HAZARD DATA

FLASHPOINT: N/A METHOD USED: N/A

FLAMMABLE LIMITS IN AIR BY VOLUME: LOWER: 1.7% UPPER: 22.0%

EXTINGUISHING MEDIA: NONE KNOWN

SPECIAL FIRE FIGHTING PROCEDURES: CONTAINERS MAY SWELL AND BURST DURING A FIRE DUE TO INTERNAL PRESSURE CAUSED BY

HEAT. THIS MAY CAUSE A SLIPPERY CONDITION ON FLOORS

UNUSUAL FIRE AND EXPLOSION HAZARDS: N/A

SECTION V – REACTIVITY DATA

STABILITY: PRODUCT IS STABLE

CONDITIONS TO AVOID: TEMPERATURES BELOW 32 (F) FOR STORAGE. TEMPERATURES BELOW 50 (F) FOR APPLICATION

INCOMPATIBILITY (MATERIALS TO AVOID): N/A

HAZARDOUS DECOMPOSITION OR BYPRODUCTS: N/A

HAZARDOUS POLYMERIZATION: WILL NOT OCCUR

PAGE 1
MATERIAL SAFETY DATA SHEET PRODUCT NAME: DRYLOK CLEAR MASONRY WATERPROOFER PRODUCT CODE: 209 HMIS CODES: 1 0 H 0 F R P SECTION I – MANUFACTURER IDENTIFICATON MANUFACTURE’S NAME: ADDRESS: UNITED GILSONITE LABORATORIES 1396 JEFFERSON AVENUE SCRANTON, PA 18509 EMERGENCY PHONE: (800) 424-9300 INFORMATION PHONE: NAME OF PREPARER: (570) 344-1202 R.
PAGE 2
SECTION VI – HEALTH HAZARD DATA INHALATION HEALTH RISKS AND SYMPTOMS OF EXPOSURE: VAPOR HARMFUL. MAY AFFECT THE BRAIN OR NERVOUS SYSTEM CAUSING DIZZINESS, HEADACHE OR NAUSEA. SKIN AND EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE: CAUSES EYE, NOSE AND THROAT IRRITATION. DIRECT CONTACT MAY CAUSE BURNING, TEARING, REDNESS AND SWELLING. SKIN ABSORPTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE: MAY BE HARMFUL IF ABSORBED THROUGH SKIN.