Use and Care Manual

ManualsBrandsDRYLOK ManualsPaint4 oz. Non-Skid Texture Additive

PRODUCT DATA SHEET

Publication Date: 8–31–20

DRYLOK

Non-Skid Texture

Additive

PRODUCT DESCRIPTION

DRYLOK

Non-Skid Texture Additive increases traction and helps

prevent slipping and falling by providing a slip resistant coating. For

use with DRYLOK

E1 Latex 1-Part Epoxy Concrete Floor Paint and

other oil, latex, or epoxy ﬂoor paints. DRYLOK

Non-Skid Texture

Additive will not change the drying characteristics or ﬁlm thickness

recommendation of the paint that it is added to. It will however

alter the appearance of the surface by lowering the gloss due to the

light scattering eﬀect of the particles that will stick up out of the

surface of the paint. DRYLOK

Non-Skid Texture Additive contains

natural pumice.

• Lightweight aggregate additive to paint, does not settle to bottom

• Increase traction and help prevent falls, accidents and injuries

BASIC USES

Use on garage ﬂoors, patios, stairs, basements, driveways, ramps

and walkways.

TECHNICAL DATA

COMPOSITION: powder

SHEEN: N/A

% WEIGHT SOLIDS: 100%

% VOLUME SOLIDS: 100%

DENSITY (LBS./US GAL.): 19.6 ± 0.1

VISCOSITY: N/A

pH: N/A

COLORS:

• o white

DRY TIME: N/A

COVERAGE:

2 oz.–4 oz./gal.

Note: Actual coverage will vary depending upon application method,

surface texture, and porosity.

COVERAGE

2 oz.–4 oz./gal.

DRY TIME

Varies on Usage

CLEAN-UP

Vacuum clean spillage. If

sweeping, use a dust

suppressant.

Dispose of contaminated

absorbent, container,

and unused contents in

accordance with local,

state, and federal

regulations.

Summary of content (2 pages)

PAGE 1
PRODUCT DATA SHEET Publication Date: 8–31–20 DRYLOK® Non-Skid Texture Additive PRODUCT DESCRI PT I ON COVERAGE 2 oz.–4 oz./gal. DRY TIME Varies on Usage CLEAN-UP Vacuum clean spillage. If sweeping, use a dust suppressant. Dispose of contaminated absorbent, container, and unused contents in accordance with local, state, and federal regulations. DRYLOK® Non-Skid Texture Additive increases traction and helps prevent slipping and falling by providing a slip resistant coating.
PAGE 2
DRYLOK® NON-SKID TEXTURE ADDITIVE RECOMMENDED FILM THICKNESS/COAT: N/A For additional health and safety information please refer to the “Safety Data Sheet”. SHELF LIFE: N/A WARNI NG Freeze/Thaw: N/A If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure.