User's Manual

accessories

Most accessories are mounted with the universal mount-

ing bracket. To install the mounting bracket, loosen knob

(G) on clamp and lower it. Lift clamp and place over

handlebar. Bring knob up and tighten. The mounting

bracket can be placed anywhere on the handlebar and it

will depend on the user’s abilities. It can also be mounted

towards the outside or the inside of the handlebar.

Forearm Platforms

Item #s TK 1035 S & TK 1035 L

Install mounting bracket and post at appropriate location.

Place forearm platform on mounting bracket post by loos-

ening knob (H) and placing forearm platform at desired

position.

Forearm platform adjustments

Height – Push in button (I) and slide post to desired posi-

tion. Release button and move forearm platform until it

clicks into place.

Width – Forearm platforms can be placed closer or far-

ther from the user by

• Looseningknob(H)andslidingtheforearmplatform

outward or inward.

• Placemountingbracketwiththeclampfacingtowards

the outside or inside of the handlebar.

• Positionforearmplatformposts(J)facingtowardsthe

outside or inside of the handlebar.

Rotation – Loosen knob (H) to rotate up or down and in

or out. It can rotate 360°.

Depth – Loosen knob (H) and slide arm pad forward or

backward or reposition mounting bracket.

• Looseningknob(K)allowsthehandgripstoextend

forward and backward, supinate and pronate.

• Looseningknob(L)allowswristangleadjustability.

• Armstrap(M)andwriststrap(N)securesarm.

Handgrips

Item # TK 1045

Install mounting brackets at appropriate location on the

handlebar. They can be mounted with the clamp facing

towardstheoutsideorinsideofthehandlebar.Toadjust

the height, push in button (I) and slide post to desired

position. Release button and move handgrip until it clicks

into place. Handgrips can rotate in four directions.