Installation Guide

16ENIGMA AIR manual Ver 1 04/2016
NOTE: Be careful not to scratch the
upper rail while sliding the brackets.
Ø5/16”
6b
6a
Fig 21
Fig 22
1
2
3
4
5
6
3
2
1
4
18. Remove the Guide Rail (#04) from the Stationary Panel
Glass (#02). Remove the Guide Rail Bracket (#06) from the
Guide Rail (#04) and hold it back in position on the wall and
mark the anchor hole. Drill a Ø5/16” anchor hole and insert a
Wall Anchor (#16).
Separate the Guide Rail Bracket (#06) components
(6a and 6b). Attach the Guide Rail Wall Bracket (#06b) to
the wall using one ST4.2 x 55mm Countersunk screw (#21).
See Fig 21 for details
19. Re-attach the Guide Rail (#04) to the Stationary
Glass (#02) and attach the Guide Rail Brackets (#06)
See Fig 22 for details