Installation Guide

“BUTTERFLY” Rev.3 Ver.3 03/2014
17
20. Make final adjustment if required. Drill the
holes through the first layer into the Wall
profiles (01) and the Glass profiles (02)
using Ø 1/8 drill bit.
Secure the Wall profiles and the Glass
profiles with the Round head screws
ST4.2×10 (07). Use the raised white
washer with the screw and attach the
Decorative Covers (10).
See Fig. 27 for details.
21. Adjust the Roller hinges (12) to make the door slide
smoothly.
See Fig. 28 for details.
2
1
4
3
Ø 1/8"
Fig.
27
2
1
Fig. 28