Prism Lux Shower Enclosure & Base SHOWER ENCLOSURE & BASE INSTALLATION INSTRUCTIONS IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings, manuals, warranty information or additional details please refer to your model’s web page on DreamLine.
SLIMLINE SHOWER BASE SHOWER BASE DIMENSIONS AND INSTALLATION INSTRUCTIONS IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings, manuals, warranty information or additional details please refer to your model’s web page on DreamLine.com Color options: --- - White -22- Biscuit -88- Black ® For more information about DreamLine products please visit DreamLine.
Preparation 1. Prior to installation, examine all boxes and packages for shipping damage and compare the piece count with your packing slip. After opening all boxes and packages read this introduction carefully. Check that all of the needed parts are included in the package by checking off the components on the “Detailed Diagram of Shower Door Components”.
SINGLE THRESHOLD SHOWER BASE Center Drain Configuration W W1 11 D1 D MODEL DLT-1132320 DLT-1136360 SPECIFICATION 32"× 32" 36"× 36" D (in) 32" 36" W (in) 32" 36" D1 (in) 15" 15" W1 (in) 16" 18" DLT-1132420 32” x 42” 32” 42” 15” 21” DLT-1134420 34” x 42” 34” 42” 15” 21” DLT-1136420 36” x 42” 36” 42” 15” 21” DLT-1142420 42” x 42” 42” 42” 20” 21” DLT-1132480 DLT-1134480 DLT-1136480 DLT-1132540 DLT-1130600 DLT-1132600 DLT-1134600 DLT-1136600 32"× 48" 34” x 48” 36"× 48" 32” x 54”
SINGLE THRESHOLD SHOWER BASE Left-Hand Drain Configuration W W1 D1 D MODEL SPECIFICATION D (in) W (in) D1 (in) W1 (in) DLT-1130601 DLT-1132601 DLT-1134601 DLT-1136601 30"×60" 32"×60" 34"×60" 36"×60" 30" 32" 34" 36" 60" 60" 60" 60" 15" 15" 17" 18" 12" 12" 12" 12" SLIMLINE SHOWER BASE manual Ver 5 Rev 8 07/2017 4
SINGLE THRESHOLD SHOWER BASE Right-Hand Drain Configuration W W1 D1 D MODEL SPECIFICATION D (in) W (in) D1 (in) W1 (in) DLT-1130602 DLT-1132602 DLT-1134602 DLT-1136602 30"×60" 32"×60" 34"×60" 36"×60" 30" 32" 34" 36" 60" 60" 60" 60" 15" 15" 17" 18" 12" 12" 12" 12" SLIMLINE SHOWER BASE manual Ver 5 Rev 8 07/2017 5
NEO ANGLE SHOWER BASE W C C A W B A MODEL SPECIFICATION W (in) A (in) B (in) C (in) DLT-2036360 DLT-2038380 DLT-2040400 DLT-2042420 36"×36" 38"×38" 40"×40" 42"×42" 36" 38" 40" 42" 18 5/16" 20 5/16" 22 5/16" 24 5/16" 25" 25" 25" 25" 12" 12" 14 3/8" 14 3/8" SLIMLINE SHOWER BASE manual Ver 5 Rev 8 07/2017 6
QUARTER ROUND SHOWER BASE W C C W R MODEL SPECIFICATION W (in) C (in) R (in) DLT-7033330 DLT-7036360 DLT-7038380 33"×33" 36"×36" 38"×38" 33" 36" 38" 12" 12" 12" 21 5/8" 21 5/8" 21 5/8" SLIMLINE SHOWER BASE manual Ver 5 Rev 8 07/2017 7
DOUBLE THRESHOLD SHOWER BASE Corner Drain Configuration W C C W MODEL SPECIFICATION W (in) C (in) DLT-1032320 DLT-1036360 32"×32" 36"×36" 32" 36" 12" 12" SLIMLINE SHOWER BASE manual Ver 5 Rev 8 07/2017 8
DOUBLE THRESHOLD SHOWER BASE Left-Hand Drain Configuration W W1 D1 D MODEL SPECIFICATION D (in) W (in) D1 (in) W1 (in) DLT-1034481 DLT-1036481 DLT-1036601 34"×48" 36"×48" 36"×60" 34" 36" 36" 48" 48" 60" 17" 18" 18" 12" 12" 12" SLIMLINE SHOWER BASE manual Ver 5 Rev 8 07/2017 9
DOUBLE THRESHOLD SHOWER BASE Right-Hand Drain Configuration W W1 D1 D MODEL SPECIFICATION D (in) W (in) D1 (in) W1 (in) DLT-1034482 DLT-1036482 DLT-1036602 34"×48" 36"×48" 36"×60" 34" 36" 36" 48" 48" 60" 17" 18" 18" 12" 12" 12" SLIMLINE SHOWER BASE manual Ver 5 Rev 8 07/2017 10
Shower Base Cross Section Diagram Finished Wall Shower Base Cement board (2"×4") Stud Mortar Drain* * not included SLIMLINE SHOWER BASE manual Ver 5 Rev 8 07/2017 11
Shower Base Installation - Preparation 1. Ensure that the floor and the studs are at right angles. Provide a 5”×5” opening in the subfloor for the drain. The 2” PVC waste pipe should extend above the surface of the sub-floor according to the drain installation instructions and the height of the Shower base. Refer to the product drawings and tables in this installation manual for the drain location. 90° 90° 90° See Fig. 1 and Fig. 2 for details.
2. Install the shower drain (NOT INCLUDED) according to the drain installation manual (supplied with the drain). See Fig. 3 for example Fig. 3 3. Place the tray into the designated position so that the Drain cutout drops around the Drain Pipe and butt the Shower Base up against the studs. See Fig. 4 for details. Lower the base over the drain pipe and set it into place against the studs. Fig.
4. Level the tray and place marks on the studs above the upper edge of the tile flange. See Fig. 5 for details. Level base in two directions Fig. 5 5. Mix the bedding material (Mortar, cement-sand mix, etc.) Concrete or plaster is not recommended. Apply enough bedding material to support the entire bottom of the shower base. This will add additional stability and prevent the base from shifting position. See Fig. 6 for details. Mortar Fig.
6. After the bedding material has been poured and before it sets, place the shower base into the position with the drain assembly sliding over the PVC waste pipe. It will be necessary to push the shower base until the top of the tile flange aligns with the marks drawn on the studs and the front edge is contacting the rough floor along the entire length of the shower base. Ensure that the base is level in all directions.
Fig.
Product Maintenance BASES and BACKWALLS: To ensure long lasting life for your acrylic base and/or back walls: wipe them off after each use with a soft cloth. To clean the acrylic base or back walls use non-abrasive sprays or cream based cleaners. Avoid the use of aerosol spray cleaners. Never use abrasive cleansers, metal brushes or scrapers that could scratch or dull the surface. GLASS: To ensure long lasting life for your glass shower products: wipe them off after each use with a soft cloth.
TEL: 866-731-2244 FAX: 866-857-3638 DREAMLINE.COM For more information on DreamLine® Shower Doors and Enclosures please visit DreamLine.
PRISM LUX / PYRAMID SHOWER ENCLOSURE INSTALLATION INSTRUCTIONS IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings, manuals or additional details please refer to your model’s web page on DreamLine.
Preparation 1. Prior to installation, examine all boxes and packages for shipping damage and compare the piece count with your packing slip. After opening all boxes and packages read this introduction carefully. Check that all of the needed parts are included in the package by checking off the components on the “Detailed Diagram of Shower Door Components”.
Tools Required Caulk Level Tape Measure Caulk Gun “PRISM LUX / PYRAMID” Ver 3 Rev 3 01/2016 Pencil Phillips Screwdriver Electric Drill Drill bit Hammer Drill bit Knife 3
Detailed Diagram of Shower Enclosure Components Packing List 01 02 03 04 05 06 07 08 09 Stationary glass hinge side Glass door Stationary glass Support bar Hinge Handle Wall anchor Round head Screw ST4.2×25 Round head screw ST4.2×55 1pc 1pc 1pc 2pcs 2pcs 1pc 6pcs 2pcs 4pcs 10 11 12 13 14 15 16 17 Decorative cover Wall bracket Bottom bracket Side strip (3 sections to cut) Anti-water strip Bottom anti-water strip Allen Key Countersunk screw ST4.
Shower Enclosure Installation 1. Assemble the Wall brackets (11) onto the Stationary glass hinge side (01) and the Stationary glass (03). See Fig. 1 and Fig. 2 for details. Fig. 1 Fig.
2. Draw a line on the wall according to your Shower Enclosure model size. W2 W1 Product specifications: Measured from the finished corner to the outside edge of the glass Model No SHEN-GL2211-343410 SHEN-GL2211-363610 SHEN-GL2211-383810 SHEN-GL2211-404010 W1 W2 34 3/8” 34 3/8” 36 3/8” 36 3/8” 38” 38” 40 3/8” 40 3/8” See Fig. 3 for details. Fig. 3 3. Place the Stationary glass (01) and (03) onto the Shower base, position against the wall and level vertically. See Fig. 4 for details.
4. Outline the position of the Wall brackets (11) on the wall. Set both lites of Stationary glass (01), (03) aside. Remove the Wall brackets (11) from the Stationary glass and place them back in position with the outlines to mark the holes for drilling on the wall. Drill the holes in the wall using a Ø 5/16” drill bit and insert the Wall anchors (07) for the Wall brackets. Fasten the Wall brackets (11) to the wall using the Round head screws ST4.2×55 (09). See Fig. 5 for details. Fig. 5 5.
Fig. 7 6. Locate the Support bar (04). Position the Support bar (04) at an angle (ideally 45°) between the glass and the wall. Level it horizontally. Hold it firmly and outline the bracket’s position on the wall. Remove the Support bar (04) and detach the wall bracket from it. Place the wall bracket against its outlined position on the wall and mark the drilling hole. Drill the hole using a Ø 5/16” drill bit, insert the Wall anchor (07) and fasten the wall bracket to the wall with the Countersunk screw ST4.
Fig. 9 7. Attach the Hinges (05) to the Stationary glass hinge side (01) with the decorative bolts facing inside the shower. Carefully bring the Glass door (02) into the Shower between the two stationary panels. Level up the Glass door (02) next to the Stationary glass hinge side (01) and fasten the hinges onto the Glass Door (02). Make sure the top edges of the Glass door (02) and the Stationary glass hinge side (01) are aligned. Inside See Fig. 10 and Fig. 11 for details.
Fig. 11 8. Press the Anti-water strip (14) onto the vertical edge of the Stationary glass (03). (Fig 12.1) Press the Bottom anti-water strip (15) onto the bottom edge of the Glass door (02). (Fig 12.2) Take three measurements: from the top edge of the Glass door (02) to the top edge of the inner part of the Hinge (05); (See Fig 12.
9. After final adjustments, secure both Stationary glass panels to the threshold with the Bottom brackets (12). Assemble the Bottom brackets (12) through the holes in the Stationary panels. Drill the holes in the Shower base through the holes in the flange of the Bottom brackets using an Ø 1/8” drill bit. Fasten the bottom brackets with the Round head screw ST4.2×25 (08) and washer. Cover the screw with the Decorative cover (10). Install the Handle (06) to the Glass door (02). See Fig. 13 for details. Fig.
Product Maintenance BASES and BACKWALLS: To ensure long lasting life for your acrylic back walls: wipe them off after each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream based cleaners. Avoid the use of aerosol spray cleaners. Never use abrasive cleansers, metal brushes or scrapers that could scratch or dull the surface. GLASS: To ensure long lasting life for your glass shower products: wipe them off after each use with a soft cloth.
TEL: 866-731-2244 FAX: 866-857-3638 DREAMLINE.COM For more information on DreamLine® Shower Doors and Enclosures please visit DreamLine.
