Installation Guide

“UNIDOOR (STYLE G)” Ver 1 Rev 5 06/2016
8
NOTE: Use parts from “Detailed Diagram of Glass Panel Components” for the Stationary
Glass assembly and installation.
2. Measure the actual width and height of
your Stationary glass (11).
See Fig. 2 for details.
3. NOTE: You will be doing straight cuts for this
stationary panel installation.
*It may be necessary to remove any burrs from
the cut end of the U-channels with a metal file
before placing the U-channel onto the glass.
a) Use a miter saw to rough cut the U-channel 2
(44”, bottom profile) to the actual width of the
glass (+) 1”.
b) Use a miter saw to rough cut the U-Channel 1
(76”, wall profile) (09) to the actual height of
the glass (+) 1”.
See Fig. 3 & 4 for details.
W (+) 1"
Fig. 3
H
Fig. 2
a)