Installation Guide

UNIDOOR-X (STYLE M) manual Ver 2 11/2016

Fig 13

Fig 14

Metal File

Plumb line

Out-of-plumb

at the bottom

<Less than 90°

Plumb line

**If the wall is out-of-plumb at

the bottom, measure that

dimension as (A) and add

it to the length of the U-channel

( +1/4” max):

Finished cut length= 24” + A

Glass Width + 3/16” + dimension A

= Finished cut length

U-Channel 1

U-Channel 2

Installation steps for 24” hinge panel glass with L-Bracket

10. Cut the vertical U-channel 1 (#09) to 71”. (Fig 13)

TIP: Use a metal file to remove any burrs from the cut

end of the U-channels before placing them onto the

glass.

NOTE The vertical U-channel for the Hinge Panel glass

will accomodate up to 1/4” for out-of-plumb.

Do not exceed this amount.

11. Cut the bottom U-channel 2 (#29) to 24”

(see note** below). (Fig 14)