User manual

CMC3 - Monitor Controller

Multiple Connections

The CMC3 is very well connected with 4 stereo inputs in total: 1x SPDIF digital input

(24 bit/192kHz), using the same DAC chipset as our established MC3.1 monitor

controller, 2 stereo balanced jack inputs, plus a 3.5mm jack with variable level

control for your Smartphone/MP3 Player.

In addition, it has a 2 professional quality headphone outputs with a separate

amplifier and level control, that provide the same audio quality and mix checking as

the CMC3 does through the speakers. Talkback is also included with internal or

external microphone, level control and audio routing to a dedicated mono output

jack & headphones.

Advanced Mix Checking

The comprehensive mix checking facilities of the CMC3 include dim, mono, phase

reverse, left and right cut as well as an easy access mute switch, allowing you to

check the quality of your recordings: tune into your mix to hear any unwanted artefacts,

test the effectiveness of the stereo mix, check for phase cancellation, listen to the

stereo difference. Features that many monitor controllers lack.

Main Features:

Ultra low noise and transparent circuit design.

Source switches can be active in any combination. 4 Inputs in Total - 1x

Digital SPDIF (192 kHz / 24 Bit) & 2 on balanced analogue 1/4" jacks & 1

3.5mm Front Panel Aux jack for your Smartphone/MP3.

3x Speakers Plus a Mono Sub can be switched individually & simultaneously

or give A/B comparisons.

Timed relay protection on all speaker outputs to prevent power up/down

bangs.

Volume can be set via the Variable Front Panel Knob or a Preset Control.

Each has parallelled custom quad pots for excellent channel matching and

smooth feel.

2x Headphone Amplifiers with Individual Level Controls with easy access to

the jacks on the front.

Front Panel 3.5mm AUX Input & Level Control for connecting MP3 player,

smartphone or tablet etc.

Built In Talkback with Level Control, Internal or External Microphone, and

Internal Routing to a Mono Output Jack & Headphones.

Comprehensive Mix Checking facilities Include Dim, Phase Reverse and

Mono, Left and Right Cut as well as an easy access Mute switch.

Kensington security slot (also called a K-Slot or Kensington lock).

Very low profile desktop enclosure with a footprint of just 18x16cm.

Stylish and Rugged Enclosure will withstand the knocks of the studio.

Designed and manufactured by Drawmer in the UK.

•