User manual

DRAWMER
CONTROL DESCRIPTION
As well as a transparent and precise signal path the CMC3 Compact Monitor
Controller incorporates many impressive features which are invaluable to the sound
engineer when listening to and examining the quality of the audio.
CHAPTER 2
1
SOURCE SELECT
Four switches select which of the analogue inputs - I/P1, I/P2 (9) and AUX (1b), and
digital input - DIGI (8), are heard at the Speaker Outputs (10) and Headphones (6b).
Each can be operated individually or simultaneously and in any combination. When
operated simultaneously the individual signals are summed into a single stereo
signal. Note that the CMC3 does not provide individual level trims for the I/P1, I/P2
and DIGI inputs and so any level matching should be applied before it reaches the
CMC3.
The digital DAC converts up to 192kHz/24 Bit and is via SPDIF (8) phono socket
located on the rear. A LOCK led above the switch shows when the signal is strong
and the CMC3 is locked in, if not lit the digital signal should be checked.
An AUX 3.5mm stereo jack input is located on the front panel (1b) to allow easy
access to connect a MP3 player, smartphone or similar audio device. A control
knob (1c) allows the adjustment of the AUX volume to match the system level.
10