User's Guide

5

1. The USB charging port of this unit supplies a DC 5V output at 1000mA
maximum current to charge your smart phone or portable device battery and it
cannot support any other voltage range.
2. Make sure the device you want to charge has a battery charge rating of DC 5V
only.
3. The USB port of this unit is designed for smart phone or portable device
battery charging only and it cannot support data transfer or connect to
computer.
4. Do not connect the USB port of this unit to other external power charger USB
ports, it may damage both units and void the warranty.
NOTE:
1.) Some smart phones and portable devices use proprietary USB connections
and circuitry, so they may not charge when plugged into the USB port. Please
refer to your device user manual before you attempt to charge them.
2.) It is normal for the unit to be warm while the USB port is in use and charging
your smart phone or portable device.
3.) Unplug the cable when your device is fully charged
The unit go into standby mode when it is plugged in for the first time.
TO SET THE TIME MANUALLY
1. In Standby mode, press and hold the CLK SET button unit the “12 Hr” or “24
Hr” blink on the LCD display.
2. Repeatedly tap the VoL- or VoL+ button to set the unit to the 24-hour mode or
12-hour mode.
3. Press the CLK SET button to confirm and the hour digits will blink.
4. Repeatedly tap the VoL- or VoL+ button to adjust the hour. Press and hold the
button for fast advance / reverse setting.
Note: Make sure the hour is set so that the PM indicator is displayed correctly.
5. Press the CLK SET button to confirm the hour setting, the minute digits will
flash to prompt for input.
6. Repeatedly tap the VoL- or VoL+ button to adjust the minute. Press and hold
the button for fast advance / reverse setting.
7. Press the CLK SET button to confirm and complete the setting.
TEMPERATURE DISPLAY
Tap the CLK SET button to change temperature display between Celsius (℃) or
Fahrenheit (℉)
Clock Setting