SDS

_____________________________________________________________________________________________
WPS-DPI-003US - Aqua Tile, Tileboard - Embossed
Revision Date 25-May-2016
Most important symptoms/effects, acute and delayed
Most Important Symptoms/Effects
No information available.
Indication of immediate medical attention and special treatment needed, if necessary
Notes to Physician
Treat symptomatically.
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media
Water fog. Dry chemical. Carbon dioxide (CO 2 ). Foam.
Unsuitable Extinguishing Media
No information available.
Specific Hazards Arising from the Chemical
Avoid dust formation. Fine dust dispersed in air may ignite. Dust can form an explosive mixture in air. Thermal decomposition can
lead to release of irritating gases and vapors.
Explosion Data
Sensitivity to Mechanical Impact
None.
Sensitivity to Static Discharge
Yes.
Protective Equipment and Precautions for Firefighters
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full
protective gear.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal Precautions
Avoid dust formation. Remove all sources of ignition. Take precautionary measures against
static discharges. Avoid inhalation of dust. Ensure adequate ventilation. Use personal
protective equipment.
Environmental Precautions
Environmental Precautions
See Section 12 for additional Ecological Information. Prevent from entering into soil,
ditches, sewers, waterways, and/ or groundwater.
Methods and materials for containment and cleaning up
Methods for Containment
Prevent further leakage or spillage if safe to do so.
Methods for Cleaning Up
Avoid dust formation. Vacuum or sweep up material and place in designated labeled waste
container. Use vacuum equipment designed specifically for combustible dust. Wet the
material with water to limit dust emission or explosion risk.
7. HANDLING AND STORAGE
Precautions for safe handling
_____________________________________________________________________________________________
Handling
Handle in accordance with good industrial hygiene and safety practice. Avoid dust
formation. Fine dust dispersed in air may ignite. Avoid breathing dust. Keep away from
heat, sparks and open flame. No smoking. Take precautionary measures against static
discharges. Ground and bond all lines and equipment associated with product system. All
equipment should be non-sparking and explosion proof. Minimize dust generation and
accumulation. Routine housekeeping should be instituted to ensure that dusts do not
accumulate on surfaces. Avoid contact with skin, eyes and clothing. Wear personal
protective equipment.
Page 3 / 8
Conditions for safe storage, including any incompatibilities