User's Manual

Cleaning d:ﬁne

4066 & 4266 mic grids

Remove the mic grid from the mic element and clean the grid using a soft cloth and demineralized

water only. Make sure the grid is dry before remounting it on the mic element. This is not possible

on the d:ﬁne

4088 and 4288 types as the diaphragm is protected inside the mic housing and the

protection grids are not removable. Therefore, for these two mics, no attempt should be made

to clean the grid surface and extreme care should be taken not to clog the grids with makeup e.g.

Clothing clip for d:ﬁne

4266 & 4288 Head-

set types

The supplied clothing clip allows you to at-

tach the cable to your clothes, thus relieving the

cable draw to the headset mic. This is essential on

especially the single-ear headset mic.

Color codes & cable steer

d:ﬁne

4166 Omnidirectional & 4188 Direc-

tional Microphone types come with a number

of cable steer clips in dierent colors. Mounted

on the cable relief, this clip allows for quick rec-

ognition of a speciﬁc headset microphone.

Protection cap

The d:ﬁne

4166 Omnidirectional & 4188 Di-

rectional Microphones come with a red plastic

cap which serves to protect the microphone

head when putting on makeup, hairspray and

more. Remove the cap before use.