Installation Instructions

Dometic FreshWell3000 Installation

Note on transport

 Always have someone help you carry the under-bench air conditioner.

 Always lift the under-bench air conditioner to move it and never drag it

over the floor (fig. 2 A).

 Do not use the ventilation slots to lift it (fig. 2 B).

Note on installation location

 To install the machine it is necessary to create openings in the floor.

These openings must be accessible and must not be covered by any

parts of the vehicle.

 Before installing the under-bench air conditioner, check whether any

vehicle components could be damaged by the installation of the under-

bench air conditioner (such as lamps, cupboards, doors).

 Make sure no combustible objects are stored or installed near the air

outlet. A distance of at least 50 cm should be kept.

 The inclination of the installation surface may not exceed 10°.

 For safety reasons, note the location of existing wiring harnesses, wires

and other components within the installation area, in particular those

which are not visible, when installing the under-bench air conditioner

(when drilling or screwing etc.).

 To obtain the optimal air-conditioning in the vehicle, install the under-

bench air conditioner in a central position, in a compartment or a similar

housing.

 Choose a place that is easily accessible for servicing as well as disassem-

bling and installing.

 Place the assembly template into the chosen compartment and check the

space available for the openings in the floor.

 To minimize the transmission of noise and vibration during operation, the

under-bench air conditioner should have a all around minimum clearance

of 30 mm to walls and furniture.

 The under-bench air conditioner must be installed on the floor.

 Keep a distance of 200 mm between the front of the under-bench air

conditioner and the walls of the compartment to facilitate filter replace-

ment.

NOTICE! Beware of damage

Observe the structural engineering of the vehicle and seal of all

openings made when installing the under-bench air conditioner.