Instructions / Assembly

DocaPole 12ft Microfiber Duster Assembly Instructions

1. To adjust extension pole length, raise thumb levers and

pull out pole segments to desired length, then lower

thumb levers to lock into place

2. Use the plastic hinge tip as needed to adjust the angle of

the desired attachment. Simply screw the female plastic

hinge tip directly onto the male metal tip of the pole, then

screw your attachment onto the angled hinge tip (make

sure it is locked into place by turning the dial on the side).

3. Screw the Microfiber Duster directly onto the Metal Tip of

the Pole. If you need the duster to be at an angle, use the

included plastic Hinge Tip and adjust the angle as needed.

4. Enjoy your DocaPole and Microfiber Duster!

PAGE 1
DocaPole 12ft Microfiber Duster Assembly Instructions 1. To adjust extension pole length, raise thumb levers and pull out pole segments to desired length, then lower thumb levers to lock into place 2. Use the plastic hinge tip as needed to adjust the angle of the desired attachment. Simply screw the female plastic hinge tip directly onto the male metal tip of the pole, then screw your attachment onto the angled hinge tip (make sure it is locked into place by turning the dial on the side). 3.