Operation Manual

INSPIRE 1 PRO

User Manual

2. Using the Intelligent Flight Battery in extremely low temperature environments (those with air

temperatures below -10℃) is not recommended. When flying in environments with temperatures

between 5℃ and -10℃, the Intelligent Flight Battery should be able to achieve the appropriate voltage

levels (above 4.2 V), but it is recommended that you apply the included insulation sticker to the battery

in order to prevent a rapid drop in temperatures.

3. If the DJI GO app displays the “Critical Low Battery Level Warning” when ying in low temperature

environments, stop ying and land the aircraft immediately. You will still be able to control the aircraft’s

movement when this warning is triggered.

4. Store the Intelligent Flight Battery in a room temperature environment and ensure that its temperature

exceeds 5℃ before using it in the low temperature environment.

5. When using the Inspire 1 Pro in a low temperature environment, begin by allowing the aircraft to hover

at a low altitude, for approximately one minute, to heat the battery.

6. To ensure optimum performance, keep the Intelligent Flight Battery’s core temperature above 20℃

when in use.

In cold environments, insert the battery into the battery compartment and allow the aircraft to

warm up for approximately 1-2 minutes before taking off.

Checking the battery level

The Battery Level Indicators display how much remaining power the battery has. When the battery is

powered off, press the Power Button once. The Battery Level Indicators will light up to display the current

battery level. See below for details.

The Battery Level Indicators will also show the current battery level during charging and

discharging. The indicators are dened below.

: LED is on.

: LED is ashing.

: LED is off.

Battery Level

LED1 LED2 LED3 LED4 Battery Level

87.5%~100%

75%~87.5%

62.5%~75%

50%~62.5%

37.5%~50%

25%~37.5%

12.5%~25%

0%~12.5%

=0%

Battery life

The battery life indicates how many more times the battery can be discharged and recharged before

it must be replaced. When the battery is powered off, press and hold the Power Button for 5 seconds