Owner manual

Dixon Valve & Coupling Company

800 High Street • Chestertown, MD 21620

ph: 800•355•1991 fax: 800•283•4966

www.dixonvalve.com

Section 7

100 Ton Ram Operating Instructions

for

Converting from

Swaging to Internal Expansion

Converting from

Swaging to Expansion

PAGE 1
Section 7 100 Ton Ram Operating Instructions for Converting from Swaging to Internal Expansion Converting from Swaging to Expansion Dixon Valve & Coupling Company 800 High Street • Chestertown, MD 21620 ph: 800•355•1991 fax: 800•283•4966 www.dixonvalve.
PAGE 2
PAGE 3
100 Ton Ram Instruction Manual 1 Remove any swaging pusher from the ram cylinder rod cap. 2 Position a rubber mat under the die bed. Position the tie down bars so that only one die bed spacer is clear. Remove the die bed spacer from die bed. Repeat this process until all die bed spacers have been removed from the die bed. Caution! Die bed spacers are heavy. Remove the die bed spacers one half at a time. 3 Install IX Master Plate onto outside of ram die bed.