User manual

4 Getting Started
4.1 Setting up the system the first time
Whensettingupthesystemforthefirsttimeplease
follow the instruction given in this section in
sequence.
1. Unpack the CU 5905 Central Unit and the DC
5980P Conference units and place them
ltemporaryonatab e.
2. Attach the button overlays to the DC 5980P
units.Usetheoverlaysdeliveredwiththeunits
forDelegateunitsandusetheoverlays
delivered with the CU5905 for Chairman and
Interpreterunits.
Please refer to section ‘
6.2 Preparing the
conferenceunit
’fordetails.
Pleasenote,thattheoverlaysareNOTdesigned
toberemovedafterattachment.
3. ConnectthepowercordtotheCU5900Power
Supply and connect the cable from the power
supplytotheCU5905.
Pleaserefertosection‘
5CU5905CentralUnit’
fordetails
4. ConnecttheunitswithChairman and
InterpreteroverlaystotheDCS‐LAN
connector(s)ontheCU5905usingEC6001‐xx
Cat5eextensioncables.
5. Turnpower‘On’totheCU5900PowerSupply.
Thelightindicationinthepowerswitchonthe
CU5905willlightred.
6. ActivatethepowerswitchontheCU5905and
the light indication in the button will light
green. After about 15 seconds, the display in
theCUwillbevisibleandtheLed’sinthe
buttonoverlayontheDC5980Pwillflashuntil
theunitsareregistered(lessthan60seconds).
7. Checkthattheunitsareworkingbytouching
the‘Speak’button.
Pleaserefertosection‘
6DC5980PConference
Unit
’fordetails.
8. Changetheunittypeaccordingtotheattached
overlay.
Please refer to section ‘
6.2.4 Configuration of
theunit
’fordetails
9. TurnOffpower
10. Placeallunitsatthepositions,wheretheyare
 ptobeusedobserving theunitty e.
11. Connect the units with EC 6001‐xx Cat5e
extensioncablesinsuitablelengthtotheDCS‐
LAN connector(s) on the CU 5905 observing
thatthecablesarenotbendedtoaradiusless
than15mm.
Please refer to section ‘
4.3 Cabling guidelines’
fordetails.
12. ConnecttheGM59xxGooseneckMicrophoneto
theunit
13. Ifneededfixthegooseneckmicrophonestothe
unitswiththetooldeliveredwiththeCU5905.
Please refer to section ‘
7 GM 59xx Gooseneck
Microphone
’fordetails.
14. Turn‘On’powerandwaitforthesystemto
becomeready.
15. Touchthe‘Speak’buttonontheunitstocheck
functionality.
16. Adjust the ‘Loudspeaker volume’ to a desired
levelusingtheinteractivemenuonthefrontof
theCU5905.
Please refer to the section ‘
5.5 Using the
InteractiveMenu
’fordetails.

User Manual DDS 5900
11