Owner’s Manual Models: SIL48, SIL60 & SIL72 CONSUMER SAFETY INFORMATION: PLEASE READ THIS MANUAL BEFORE INSTALLING AND OPERATING THIS APPLIANCE. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN A POSSIBLE ELECTRIC SHOCK, FIRE HAZARD, AND/OR INJURY AND WILL VOID THE WARRANTY. To view the full line of Dimplex products, visit www.dimplex.
Table of Contents Welcome..............................................................3 IMPORTANT INSTRUCTIONS............................. 4 Specifications.......................................................6 Installation............................................................7 Operation...........................................................16 Maintenance.......................................................19 Troubleshooting..................................................21 Warranty.......
Welcome Please use our convenient online registration page to record your model and serial numbers for future reference at: www.dimplex.com/register Model Number AIR HEATER CHAUFFE-AIR CALENTADOR DE AIRE CAUTION VOLTS VOLTIOS WATTS VATIOS CAT. # № DE CAT. CAT. NO. CSA # ATTENTION XXXXX MADE IN CHINA FOR: / FAIT EN CHINE POUR: HECHO EN CHINA POR: SERIAL NO.
IMPORTANT INSTRUCTIONS Read this manual before attempting to install or use the electric fireplace. Always comply with the warnings and safety instructions contained in this manual to prevent personal injury or property damage. When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: • This appliance is hot when in use. To avoid burns, do not let skin touch hot surfaces.
IMPORTANT INSTRUCTIONS • Do not run cord under carpeting. Do not cover cord with throw rugs, runners or the like. Arrange the cord away from heavily trafficked areas, where it will not be tripped over. • Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or a relocatable power tap (outlet/power strip). • To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like bed, where opening may become blocked.
Specifications Electrical Voltage: Watts: Amps: Wiring: Bulb Type: Approvals: 120VAC 60Hz 1400 Watts 12 A Plug-In LED Dimensions SIL48 Width: Height: Height with feet: Depth: Depth with feet: 41-1/4" (104.6 cm) 18-1/8" (46.0 cm) 21-1/2" (54.7 cm) 5-1/4" (13.3 cm) 11" (27.9 cm) Weight 40.8 lbs (18.5 kg) SIL60 Width: Height: Height with feet: Depth: Depth with feet: 51-7/8" (131.8 cm) 18-1/8" (46.0 cm) 21-1/2" (54.7 cm) 5-1/4" (13.3 cm) 11" (27.9 cm) Weight 63.5 lbs (28.
Installation GROUNDING INSTRUCTIONS • This product is equipped with a cord that has an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. • This heater is for use on 120 volts. The cord has a plug as shown. Grounding Pin • A 15 Amp, 120 Volt circuit is required. A dedicated circuit is preferred, but not essential in all cases.
Package Contents Tools required A B x6 x6 C x2 D x4 E K F G H I L J 8
Installation IN-WALL INSTALLATION Cabinet - in / cm Model Sierra 48 - SIL48 Sierra 60 - SIL60 Sierra 72 - SIL72 A 41.6 / 105.7 52.4 / 133.1 64.4 / 163.6 B 6.5 / 16.5 6.5 / 16.5 6.5 / 16.5 C 18.5 / 47.0 18.5 / 47.0 18.5 / 47.0 C B C B A Firebox - in / cm Model Sierra 48 - SIL48 Sierra 60 - SIL60 Sierra 72 - SIL72 A D 41.2 /1 04.6 51.9 / 131.8 D 64.0 / 162.6 E 4.7 / 11.9 4.7 / 11.9 4.7 / 11.9 F 18.1 / 46.0 18.1 / 46.0 18.1 / 46.
Installation IN-WALL INSTALLATION 1 E 2 1 E 3 10 2 B x6 E
Installation 4 G&H H I J 5 F 6 Lock glass in place Unlocked Move to lock Locked 11
Installation ON-WALL INSTALLATION 1 2 A B Wall B A x6 3 12 Dimensions - in / cm Model Sierra 48 - SIL48 Sierra 60 - SIL60 Sierra 72 - SIL72 B x6 A 16 / 40.6 32 / 81.3 32 / 81.3 B 7.9 / 20 7.9 / 20 7.
Installation 4 G&H H I J 5 F Lock glass in place 6 Unlocked Move to lock Locked 13
Installation TABLE TOP INSTALLATION 1 D K x4 2 14 G&H H I J
Installation 3 4 F Lock glass in place Unlocked Move to lock Locked C x2 15
Operation The fireplace can be operated with the multi–function IR remote control or from the touchscreen controls on the top-right of the front glass. Once the fireplace is turned on the digital display and the control icons on the front glass will illuminate. If no button or icon is pressed within 10 seconds, the fireplace controls will deactivate by the digital display turning off first and then the icons. To reactivate the controls press any button on the remote or touch any icon on the front glass.
Operation POWER ON/OFF The ON/OFF button turns the fireplace ON and OFF. When the fireplace is OFF, pressing the ON/OFF button on the remote control or touching the icon on the front glass will turn on the fireplace. If the ON/OFF button is pressed again within 10 seconds it will turn OFF the fireplace. With inactive controls, press twice to turn OFF the fireplace. The first press on the ON/OFF button lights up the touchscreen icons and activates the controls. The fireplace has a built-in memory function.
Operation Heater Enable & Disable Function: From the touchscreen controls touch and hold the Heat icon for 10 seconds. The ember bed will flash 6 times to indicate that the heater function is disabled. When the heat is disabled, pressing the Heat button will cause the ember bed to flash, but the heater will not operate. To enable the heater again, touch and hold the Heat icon for 10 seconds. ! NOTE: This function cannot be set with the remote control.
Maintenance • Clean the metal trim using a water-dampened soft, clean cloth. DO NOT use brass polish or household cleaners as these products will damage the metal trim. • The motors used on the fan and the flame generator assembly are prelubricated for extended bearing life and require no further lubrication. However, periodic cleaning/vacuuming of the fan/heater and air intake/output vents is recommended.
Maintenance Disposal of Used Batteries Batteries may contain hazardous substances that could be endangering to environment and human health. • This symbol marked on the battery and/or packaging indicates that used batteries shall not be treated as municipal waste. Instead they shall be left at the appropriate collection point for recycling. • By ensuring the used batteries are properly disposed of, you will help prevent potential negative consequences for the environment and human health.
Troubleshooting Fault code Fault Cause Solution E1 The heater overheating Call technical support. E2 Thermistor is defective. Call technical support. E3 The heater not working. If the vents are dirty or clogged. Unplug the power, clean the dust and debris of the vent area. Wait for 5 minutes, plug in and turn on the heater. If the heater still don't work, please call technical support.
Warranty One Year Limited Warranty Products to which this limited warranty applies This limited warranty applies to your newly purchased Dimplex electric compact insert. This limited warranty applies only to purchases made in any province of Canada except for Yukon Territory, Nunavut, or Northwest Territories or in any of the 50 States of the USA (and the District of Columbia) except for Hawaii and Alaska. This limited warranty applies to the original purchaser of the product only and is not transferable.
• Glen Dimplex Americas will in its sole discretion either repair or replace such defective product or part without charge. If Glen Dimplex Americas is unable to repair or replace such product or part, or if repair or replacement is not commercially practicable or cannot be timely made, Glen Dimplex Americas may, in lieu of repair or replacement, choose to refund the purchase price for such product or part.
Technical Service Contact our friendly customer service team for technical and trouble-shooting support. Make sure you have your sales receipt, location of purchase, and the model and serial number of your product. 1-888-346-7539 | www.dimplex.com/contact_us In keeping with our policy of continuous product improvement, we reserve the right to make changes without notice.
