SDS

Safety Data Sheet Version: V1.1
According to 2012 OSHA Hazard Communication Standard
(29 CFR 1910.1200)
REPORT NO.: LCS190930042ASD
SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. Page 6 of 13
Manganese
dioxide
1313-13-9
TWA: 0.02 mg/m
3
Mn
respirable
particulate matter
TWA: 0.1 mg/m
3
Mn
inhalable
particulate matter
(vacated) Ceiling: 5 mg/m
3
Ceiling: 5 mg/m
3
Mn
IDLH: 500 mg/m
3
Mn
TWA: 1 mg/m
3
Mn
STEL: 3 mg/m
3
Mn
Zinc
7440-66-6
STEL: 10 mg/m
3
respirable
fraction
TWA: 2 mg/m
3
respirable
fraction
TWA: 5 mg/m
3
fume
TWA: 15 mg/m
3
total dust
TWA: 5 mg/m
3
respirable
fraction
IDLH: 500 mg/m
3
Ceiling: 15 mg/m
3
dust
TWA: 5 mg/m
3
dust and fume
STEL: 10 mg/m
3
fume
Chemical
name
Alberta
British Columbia
Ontario TWAEV
Quebec
Manganese
dioxide
1313-13-9
TWA: 0.2 mg/m
3
TWA: 0.2 mg/m
3
TWA: 0.02 mg/m
3
TWA: 0.1 mg/m
TWA: 0.2 mg/m
3
Other
Exposure
Guidelines
Vacated limits revoked by the Court of Appeals decision in AFL-CIO v. OSHA, 965 F.2d 962(11th
Cir., 1992) .
(b) Appropriate engineering controls
Engineering
Measures
Showers
Eyewash stations
Ventilation systems
(c) Individual protection measures, such as personal protective equipment
Eye/Face
Protection
Face protection shield.
Skin and body
Protection
Wear protective gloves and protective clothing. Long sleeved clothing. Chemical resistant
apron. Impervious gloves.
Respiratory
Protection
No protective equipment is needed under normal use conditions. If exposure limits are
exceeded or irritation is experienced, ventilation and evacuation may be required.
Hygiene
Measures
Handle in accordance with good industrial hygiene and safety practice. Do not eat, drink or
smoke when using this product. Take off contaminated clothing and wash before reuse.
Avoid contact with skin, eyes or clothing. Wear suitable gloves and eye/face protection.
Contaminated work clothing should not be allowed out of the workplace. Regular cleaning of
equipment, work area and clothing is recommended. Wash hands before breaks and
immediately after handling the product. For environmental protection, remove and wash all
contaminated protective equipment before re-use.
Section 9- Physical and Chemical Properties
Form
Solid
Color
No information available
Odor
No information available
pH
No information available
Melting point/freezing point
No information available