User Manual
Owner's Manual
29
Stereo
When the STEREO parameter is turned on, the Live FX’s outputs will be congured
for stereo operation (this is the default setting). When the Stereo parameter is
turned off, the Live FX is congured for mono operation. When congured for
mono operation, all outputs will carry the same mono-summed signal. The XLR
outputs and 1/4” stereo output will all be affected when changing this setting.
To edit the STEREO setting:
1. Press the <System> button.
2. Turn the <Edit 4> knob to turn Stereo on or off.
3. Press the ashing <System> button to exit the System Edit menu.
Preset Load
When selecting presets with the DATA encoder, this system parameter determines
whether Live FX presets are loaded using a one step or two step process. The
selectable options are:
• Auto
With this option selected, presets will automatically load as they are selected
with the <DATA> encoder.
• Manual
With this option selected, presets will require you to select the preset using
the <DATA> encoder then press the <DATA> encoder to manually load
the preset. This option is useful for eliminating accidental preset changes with
the DATA encoder. If you stop on a preset when using the Manual option
and don’t press the <DATA> encoder, the preset will revert back to the
currently active preset after approximately four seconds.
NOTE: The Preset Load parameter does not affect preset changes using the Up
and Down footswitches.
To edit the PRESET LOAD setting:
1. Press the <System> button.
2. Press the <DATA> encoder once to navigate to page 2 within the System Edit
menu.
3. Turn the <Edit 1> knob to select the desired setting.
4. Press the ashing <System> button to exit the System Edit menu.