User Manual

Loop Phrases can be stopped in two ways: Immediately stop when the

STOP/TEMPO footswitch is pressed or ﬁnish playing through to the end of

the phrase and stop. These two Stop Modes are called Stop and Finish. To

change Stop Modes, follow these steps:

1. Press the

button. It will now be lit.

2. Press the RECORD MODE button. The two Stop Modes are labeled to the

right of the RECORD MODE LEDs. Select the LED which is labeled with the

Stop Mode you want to use.

3. Press the ExIT button.

4. Press the STORE button twice to store the changes, if desired.

Stop Modes