User Manual

9
OUTPUT JACK OPERATION
The output jacks have an auto-sensing feature which allows the TRIO to automatically optimize the outputs
for the application. The chart below describes how the TRIO will operate depending on which outputs are
connected.
Operation
Description
MIXER OUT
Connected
AMP OUT
Connected
HEADPHONE OUT
Connected
Speaker cabinet emulation will
be applied to the guitar signal
and a mono mix of the bass,
drums, and guitar will be sent
to the MIXER OUT jack.
A mono mix of the bass,
drums, and guitar signal will
be sent to the AMP OUT jack.
Complimentary equalization
will be applied to the drum
and bass parts to make them
sound better when played
back through a guitar speaker
cabinet.
NOTE: When using your guitar
amp to play the drums and
bass from the TRIO, set the amp
to run as cleanly as possible in
order to avoid distorting the
drums. The drums and bass are
pre-EQ'd to sound best through
a clean amp with typical EQ
settings.
The guitar signal will be fed to
the AMP OUT jack only. The mix
of bass and drums will be sent
to the MIXER OUT jack.
Speaker cabinet emulation will
be applied to the guitar signal
and a stereo mix of the bass,
drums, and guitar will be sent
to the HEADPHONE OUT jack.
The MIXER and AMP outputs
will be muted.