User Manual

3-2 Event Setup
3-2.1 Video Loss
3-2.1.1 Configuration
Item
Description
Enable
Enable / Disable video loss detection function
3-2.1.2 Event Handling
Item
Description
Log
Write to event log when the video loss event happens.
Event Record
Select channel for event recording when event occurs. The video setup
corresponds to the "Configuration → Recording Settings → Event
Video Recording" (refer to 3-1-1-2 Event Record)
Popup
In the live mode, if video loss of a channel is detected, it will pop up the
channel full screen. You can specify a warning window display.
Popup Channel
When an event occurs, pop up the specified channel.
Buzzer
Specify the DVR behavior of whether to activate the
buzzer when an event occurs.
Relay
Specify the DVR behavior of whether to activate the
relay when an event occurs.
PTZ
Specify the DVR behavior of whether to change to the
PTZ control mode to the specified channel when an event occurs.
Go Preset
Moves the camera to the specified preset point when an event occurs.
Resume Preset
Moves the camera back to the specified preset point when an event is
finished.