User`s guide

TCP/IP Configuration

5-1

TCP/IP Configuration

If you will be printing from a UNIX system, use this section to configure the network

interface card for use with TCP/IP. After the NIC is configured, it provides standard

UNIX printing services so you can use the same filters and commands that you use now.

The NIC contains installation software for the following platforms:

• DEC ULTRIX RISC 4.3 and 4.4

• DEC OSF/1 2.0 and 3.0

• Solaris 1.1.3 (SunOS 4.1.3) and 2.3 (SunOS 5.3)

• HP-UX Series 700 and 800 9.01

• IBM AIX 3.2.5

• SCO UNIX 3.2

The NIC also contains source code that you can recompile for configuring the card for

other System V platforms.

The following general procedure enables TCP/IP printing:

1. Load the NIC software.

2. Configure the IP address.

3. Run the appropriate installation script.

4. Complete the configuration for your operating system.

5. Run the nsconfig utility.