User guide

LIVEMIX CS-DUO
49
ASSIGN A MIX TO DA-816 OUTPUT
The 8 purple slots represent the available outputs. When a mix
is assigned to one or more of the outputs, the Port/Mix Name
(if available) will be visible. Saving personal mixes with the
performer’s name or instrument helps identify easier.
From the Select DA-816 Output screen, SELECT an output you
wish to assign.
1. The screen will change to display the MIX-16/MIX-32 Ports.
Each slot is labeled with the loaded or saved mix name (1)
and Port (2). If a mix is not loaded, the mix name will be
blank (3). It is possible to route Control Surface Ports even
if a personal mixer is not connected but audio will not be
present on that output.
2. Select a CS Port to assign to the output. The assignment will
be visible on the DA-816 Output screen.
If you are using two DA-816s, you will be able to select the
outputs on the î™·rst or second DA-816. The selected DA-816 will
have a white border.
UNASSIGN AN OUTPUT
To unassign a previously assigned output:
1. SELECT the DA-816 Output (1-8) from the DA-816 Output
screen.
2. PRESS Unassign Output. The Output is now unassigned.