User guide

EVO Systems 11
Table 3: Special Characters Catalogue
6.4 Deleting User Access Codes
To delete user access codes, follow steps 1 to 5 in section 6.5.1 on page 12. Once the
information is erased, press the [
ENTER] button to save and exit.
6.5 Programming User Access Codes
The System Master and Users with the Master feature can program user access codes
with User Options and Area Assignments. The section 6.5.1 on page 12 describes the
steps you would follow to program user access codes. If you wish to program user
access codes using the NEware Software, please contact your installer for information.
If the keypad emits a rejection beep at any point during the programming procedure, you
may have chosen an existing user code or you do not have access to certain User
Options (section 6.6) and Area Assignments (step 7 in section 6.5.1 on page 12). Users
with the Master feature can only assign User Options and Area Assignments that they
are assigned to. For example, if a User with the Master feature is assigned User Option 1
and Area 2, they can only assign Option 1 and Area 2 to a user access code.
LCD LED
LCD LED