Instruction manual
(Advanced function; not for normal use)
-25-
CAMERA ADJUSTMENT
• CAM TITLE OFF / ON
Select a camera title to be shown on the screen.
CAMERA TITLE SETUP
CAMERA
ABCDEFGHIJKLMNOPQRSTUV
WXYZ0123456789-!#$%&’
()_`.:;<=> @^*./^*X+/
CHR1 CHR2
CLR POS
RETURN
• WPC
WPC
PLEASE COVER THE LENSENTER PW
RETURN
The WPC (White Pixel Compensation) features is used to correct the CCD
if dead pixels are visible. You must cover the lens completely so no light
can enter the camera sensor for WPC to work. Press the up, down, left,
right, middle button to start the highlight of compensation. When prompts
Use Up/Down/Left/Right to move around. CLR will clear info. POS allows
you to change the title position.
SYNC
•
SYNC
PHASE UP PUSH ENTER
PHASE DOWN PUSH ENTER
RETURN
Camera uses internal sync (INT) when camera is connected to DC power.
Line Lock (LL) is used when camera is connected to AC power. If you notice
color rolling when the camera is connected to AC power, select LL then
select PHASE UP or PHASE DOWN and press ENTER to adjust the phase.