Instruction manual

-23-
CAMERA ADJUSTMENT
MONITOR AREA :
Allowsyoutocongureupto4motiondetectionareas.Areaswillbehighlighted
onthescreenandashwhenmotionisdetectedwithinthem.Areaswillnotash
ifmotionisdetectedinareasthathavebeendisabledusingDETECTAREA.
MONITOR AREA
AERA SEL 1 / 4
MODE OFF
TOP
000
BOTTOM
000
LEFT
000
RIGHT
000
RETURN

AREA SEL: 1/4,2/4,3/4,4/4 Select area to adjust.
Whenenabled,theboxcolorsare:
1Pink,2Green,3Blue,4Yellow
Whenareasoverlap,theareawiththelowestnumber
takes priority
MODE: OFF/ON. Disable / Enable area
TOP: 000-015 Position of the top of the area
BOTTOM: 000-015 Position of the bottom of the area
LEFT: 000-023 Position of the left side of the area
RIGHT: 000-023 Position of the right side of the area
Note:TOPvaluecannotbegreaterthanBOTTOM,andLEFTcannotbegreater
thanRIGHT.Numbersautomaticallyupdatetopreventinvalidpositions.
Gridareas:Motiondetectionenabled
Transparent:Motiondetectiondisabled