Instruction Manual
12
13
HOME SCREEN
Once connected, the Home screen will appear. This screen has
everything needed to program the controller.
By default, the controller’s Program is off. To turn it on, push the switch
under the “Program” area. It will turn green and the Program area will
light up indicating that the program is active and can now be modied.
The controller is now ready to be programmed. Simply select the
schedule (weekly, even/odd, or cyclical), set your start date or days, add
times, and set a duration. The controller is updated immediately each
time a button is tapped.
Schedule
Overview:
Shows a chart
with current
program run
times. Red
lines indicate
that there is
an overlapping
start time
Activate or
deactivate
the program
Program
schedule
Weekly days
settings
Up to ve start
times. Select an
existing start
time to edit/
delete.
Red start times
are overlapping
and will not run
Run time for
valve
Home
(current page)
Controller
settings
Manual run
Picture of
controller