Datasheet

DRAWING NUMBER
REV
1501 ROUTE 34 SOUTH
FARMINGDALE, NJ 07727
TITLE
MATERIAL
FSCM
FINISH:
83330
THIS DRAWING AND THE CONTENTS HEREIN ARE CONFIDENTIAL AND
THE SOLE PROPERTY OF DIALIGHT. REPRODUCTION OF THIS DRAWING
OR CONSTRUCTION OF ANY PARTS WITHIN THIS DRAWING ARE
FORBIDDEN WITHOUT THE WRITTEN CONSENT OF DIALIGHT.
TYP (4)
.040 .002
1,02 0,05[ ]
TYP (3)
.100 .002
2,54 0,05[ ]
.19
[4,8]
.020
[0,51]
.071 .008
1,8 0,2[ ]
.068
+.015
-.008
1,72
+0,38
-0,20
[ ]
.054
[1,37]
.539
[13,7]
.098
[2,48]
.339
[8,6]
.150
[3,81]
.100
[2,54]
.015
[0,38]
.020X.016
[.51X.41]
.015
[0,38]
.118 .010
3 0,25[ ]
.150
[3,8]
.100
[2,54]
.200
[5,08]
.200
[5,08]
.10
[2,5]
TYP.
CE
NO 1-24-08
BLANK RED
BLANK GREEN
BLANK YELLOW
RED BLANK
RED RED
RED GREEN
RED YELLOW
GREEN BLANK
571-0121F GREEN RED
571-0122F GREEN GREEN
571-0123F GREEN YELLOW
571-0130F YELLOW BLANK
571-0131F YELLOW RED
571-0132F YELLOW GREEN
571-0133F YELLOW YELLOW
C-17454 B
2mm LED BI-LEVEL CBI
RoHS COMPLIANT
432
1
571
RECOMMENDED PC
BOARD HOLE PATTERN
CATHODE
BOT. LED
TOP LED
2 mm DOT
POINT LED
4
ANODE
3
CATHODE
2
ANODE
PIN 1
CATHODE
REV ECN NO REVISIONS DRN CKD APP DATE
A NEW RELEASE
AE
B
ADDED WAVE SOLDERING
PROFILE & NOTES 5,6,7,8,9
AJF KLJ NO 9-21-11
OPERATING CHARACTERISTICS AT 25 C AMBIENT
CHARACTERISTICS COLOR MIN TYP MAX UNITS TEST CONDITIONS
LUMINOUS INTENSITY
RED 8 15
mcd I
F = 10 mAYELLOW 5 8
GREEN 5 10
FORWARD VOLTAGE
RED 2.0 2.5
V I
F = 20 mAYELLOW 2.1 2.5
GREEN 2.2 2.5
DOMINANT WAVELENGTH
RED 625
nmYELLOW 588
GREEN 568
PEAK EMISSION WAVELENGTH
RED 627
nmYELLOW 590
GREEN 565
VIEWING ANGLE 2
q1/2
RED 70
DegreeYELLOW 70
GREEN 70
CAPACITANCE
RED 15
pF V
F = 0 V, f = 1 MHzYELLOW 20
GREEN 15
ABSOLUTE MAXIMUM RATING AT 25°C AMBIENT RED YELLOW GREEN UNITS
POWER DISSIPATION 105 105 105 mW
FORWARD CURRENT 30 30 25 mA
DERATING LINEAR FROM 25 C .40 .33 mA/ C
REVERSE VOLTAGE 5 V
LEAD SOLDERING TEMPERATURE, 5 SEC., 1/16" FROM BODY 260 °C
OPERATING TEMPERATURE -40 TO +85 °C
STORAGE TEMPERATURE -40 TO +85 °C
ASSY. NO.
LED COLOR (DIFFUSED)
TOP POSITION BOTTOM POSITION
571-0101F
571-0102F
571-0103F
571-0110F
571-0111F
571-0112F
571-0113F
571-0120F
TOLERANCES:
UNLESS OTHERWISE SPECIFIED
FRACTIONS: 1/64
DECIMALS (.XX): .01
DECIMALS (.XXX): .005
DECIMALS (.XXXX): .0005
ANGLES: 1
SCALE: DRAWING SCALE
ALL DIM'S IN: INCHES (MM)
SHEET 1 OF 1 FAMILY TABLE:
NOTES:
1. LED LEAD DIMENSIONS ARE MEASURED AT HOUSING EXIT.
2. PIN NUMBERS FOR REFERENCE ONLY, DESIGNATION
NON-EXISTENT ON PARTS
3. DIALIGHT PART NUMBERS: 571-01XXF
4. THIS ASSEMBLY CONTAINS ELECTROSTATIC DISCHARGE SENSITIVE
DEVICES (ESDS). MAINTAIN ALL PRECAUTIONARY MEASURES DURING
ASSEMBLY, HANDLING AND STORAGE IN ACCORDANCE WITH 1PC-A-610.
5. RECOMMENDED WAVE SOLDERING TEMPERATURE: 245 C~260 C.
6. DO NOT APPLY STRESS TO THE EPOXY RESIN WHEN TEMPERATURE
IS ABOVE 85 C.
7. SOLDERING PROFILE APPLIES TO LEAD FREE SOLDERING PROCESS
(Sn/Cu/Ag ALLOY).
8. DURING WAVE SOLDERING, THE PCB TOP SURFACE SHOULD BE KEPT
BELOW 105 C.
9. DO NOT SOLDER MORE THAN ONCE.
RoHS Compliant 571-01XXF
Part Numbers with the "F" suffix ending are RoHS Compliant.
Example: 571-0112F
Packaging is marked with "RoHS Compliant" label or
equivalent markings.
Parts can be wave soldered, dip soldered or hand soldered using
typical lead-free soldering process with max 260°C temp. for 5 sec.
RECOMMENDED WAVE SOLDERING PROFILE