Instruction Manual
1 2
3
5
6
7
4
Product Overview
1.
Water Tank
2.
Cold Evaporation Filter (CEF)
3.
Cold Evaporation Filter Lid (CEF Lid)
4.
Top Cover
5.
Salt Bottle with 1 Gram Scoop
6.
Power Cord
7.
Pre-Filter
1.
Remove the air purier from the box and check that all the items are included. It is a
good idea to keep the packaging for storage or in the event it must be shipped back
for service.
2.
Remove the top cover and make sure the CEF and CEF lid are securely in place
.
3.
Place the Aaira + Humidier on a at, solid surface in proximity to an AC electrical
outlet.
4.
Connect the power cord to the Sterilizer, and route the power cord to the outlet, but
do not plug it in yet. Make sure that the power cord is out of the way and does not
pose a tripping hazard, and is out of reach of children and pets.
The Aaira + Humidier has a two-stage cleaning system to disinfect the air. A fan draws air
in through the pre-lter at the bottom of the purier. Inside, the air passes through the Cold
Evaporation Filter and exits through the top cover. The two stages to the air purier are:
STAGE 1: Pre-lter.
The pre-lter has a screen that captures large airborne particles.
STAGE 2: Cold Evaporation Filter (CEF).
The CEF absorbs the HOCl water generated in the water tank. The HOCl water is evaporated
as air passes through the CEF. This disperses the HOCl molecules throughout the airspace in
the room allowing it to destroy a variety of bacteria and viruses.
How It Works
Unpacking and Setup
3 4Copyright © 2022 Dernier & Hamlyn Inc. All rights reserved. Revised 2022/06/23