Operation Manual

ENGLISH
40
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual,
the labels on the charger and the battery pack show
the following pictographs:
Read instruction manual
before use.
Battery charging.
Battery charged.
Battery defective.
Hot/cold pack delay.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Use only with DEWALT battery packs,
others may burst, causing personal injury
and damage.
Do not expose to water.
Have defective cords replaced
immediately.
Charge only between 4 °C and 40 °C.
Discard the battery pack with due care for
the environment.
Do not incinerate the battery pack
NiMH, NiCd+ and Li-Ion.
Charges NiMH and NiCd
battery packs.
Charges Li-Ion battery packs.
See technical data for charging time.
Package Contents
The package contains:
1 cordless percussion drill
(DCD945, DCD935, DCD925 models)
1 cordless midhandle drill driver
(DCD940, DCD930, DCD920 models)
1 Li-Ion battery pack (L1 models)
2 Li-Ion battery packs (L2 models)
2 NiMH battery packs (B2 models)
3 NiMH battery packs (B3 models)
1 Kitbox
1 Charger
1 Side handle
1 Instruction manual
1 Exploded drawing
NOTE: Battery packs and chargers are not included
with N-models.
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1, 2)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. Trigger switch
b. Forward/reverse button
c. LED light
d. Chuck
e. Torque adjustment collar
f. Mode control collar
g. Gear shifter
h. Side handle
i. Main handle
j. Battery pack
k. Battery release buttons
l. Charger
INTENDED USE
These drills/drivers/hammerdrills are designed
for professional drilling, precussion drilling and
screwdriving applications.