Extra Information

7
ENGLISH
Director Engineering and Product Development
Horst Großmann
D E WALT, Richard-Klinger-Straße 11
D-65510, Idstein, Germany
Safety instructions
General power tool safety warnings
Warning! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions listed
below may result in electric shock,
fi re and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in all of the warnings listed
below refers to your mains operated (corded) power
tool or battery operated (cordless) power tool.
1 Work area safety
a Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b Do not operate power tools in explosive
atmospheres, such as in the presence of
fl ammable liquids, gases or dust.
Power tools create sparks which may ignite the
dust or fumes.
c Keep children and bystanders away while
operating a power tool.
Distractions can cause you to lose control.
2 Electrical safety
a Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools.
Unmodifi ed plugs and matching outlets will
reduce risk of electric shock.
b Avoid body contact with earthed or
grounded surfaces such as pipes, radiators,
ranges and refrigerators.
There is an increased risk of electric shock if
your body is earthed or grounded.
c Do not expose power tools to rain or wet
conditions.
Water entering a power tool will increase the
risk of electric shock.
EC-Declaration of conformity
DC940/DC945/DC935/DC920/DC925
D E WALT declares that these power tools have been designed in compliance with: 98/37/EC, 89/336/EEC,
73/23/EEC, 86/188/EEC, EN 60745-1, EN 60745-2-1, EN 60335, EN 55014-1, EN 55014-2, EN 61000-3-2,
EN 61000-3-3.
For more information, please contact D
E WALT at the address below, or refer to the back of the manual.
DC940 DC945 DC935 DC920 DC925
L
pA
(sound pressure) dB(A) 88 102 102 90 104
Weighted RMS acceleration value m/s
2
< 2.5 17.8 21.1 < 2.5 25.3
K
pA
(sound pressure uncertainty) dB(A) 2.8
K
WA
(acoustic power uncertainty) dB(A) 2.8