Operation Manual

21
ENGLISH
ANGLE GRINDER
D28410/D28411/D28413/D28414/D28420/
D28421/D28422/D28423/D28432C/D28750
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make
D
EWALT one of the most reliable partners for professional power tool users.
Technical data
D28410 D28411 D28413 D28414 D28420 D28421
Voltage V 230 230 230 230 230 230
(U.K. & Ireland only) V 230/115
Power input W 2,100 2,100 2,200 2,200 2,300 2,300
No-load speed min
-1
8,500 6,500 8,500 6,500 8,500 6,500
Wheel diameter mm 180 230 180 230 180 230
Spindle M14 M14 M14 M14 M14 M14
Weight kg 4.7 4.7 4.7 4.7 5.3 5.3
D28422 D28423 D28432C D28750
Voltage V 230 230 230 230
(U.K. & Ireland only) V 230/115 230/115
Power input W 2,400 2,400 2,600 2,400
No-load speed min
-1
8,500 6,500 6,500 5,000
Wheel diameter mm 180 230 230 230
Spindle M14 M14 M14 M14
Weight kg 5.3 5.3 5.3 5.3
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Fire hazard.
EC-Declaration of conformity
D28410/D28411/D28413/D28414/D28420/
D28421/D28422/D28423/D28432C/D28750
D
EWALT declares that these power tools have been
designed in compliance with: 98/37/EEC,
89/336/EEC, 73/23/EEC, EN 50144, EN 55014-2,
EN 55014-1, EN 61000-3-2 & EN 61000-3-3.
For more information, please contact D
EWALT at the
address below, or refer to the back of the manual.