Assembly Instructions

Locate the wall studs. Place shelf against wall in the desired position. Use a level to

verify that the shelf is level. Draw a horizontal line on each end of shelf on wall with a

pencil.

Rotate the shelf to reveal keyholes. Align shelf against the lines previously marked on

wall and mark holes for keyholes. Remove Shelf. Double check holes witha level and

re-mark if necessary.

Install screws into marks with studs, for the marks without a wall stud, use a power drill

and a 3/16” drill bit. Drill holes into the wall at the pencil mark. Insert anchor. Install

screws, into the studs (or anchors). Make sure they are not flush against the wall.

Note: If you are drilling into a wall where no studs are available, use the proper

anchors to mount the shelf. Anchors have been provided for this purpose. Additional

drywall anchors may be necessary depending on stud placement.

Align keyholes with screws and then gently pull down on shelf securing it onto the

wall.

Includes:

(1) shelf

(2) screws

(2) drywall anchors

Suggested Tools:

Floating Keyhole Shelf

min.

installation

Make sure that at least two screws will be installed

into wall studs for best results. Use stud finder (not

included) to locate wall studs to hold the

maximum weight.

Item#

213-4019

213-4020

213-4021

Model#

9601014

9601016

9601018

3/16”

Size Keyhole Shelves

12 in 10 lbs

18 in 10 lbs

24 in 10 lbs

MENARDS.COMM4019 4020 4021 4022 Floating Keyhole shelf E V1