Installation Instructions

Figure 3
Figure 1 Figure 2 Figure 3
Pine Wood Shelf with Metal Brackets
Assembly Instrucons
weight capacity 13.2 lb / 6 kg
Tools Required (not included):
- Level
- Pencil
- Screwdriver
- Drill
- 7/32” Drill Bit
Installaon Materials (included):
- 1 Shelf
- 2 Shelf Brackets
- 4 Installaon Screws 1.5” long
- 4 Plasc Anchors
- 4 Set Screws 0.5625” long
Please read this manual carefully before
beginning assembly of this product. Check that
all components are included. Keep this manual
for future reference.
INSTALLATION:
STEP 1: Requires: Shelf Bracket, Screwdriver, and Level
Use a stud nder (not included) to nd studs in desired mounng area. Place shelf bracket against wall in the desired
posion. Use a level (not included) to ensure the shelf bracket is level, then mark holes with a pencil (not included).
See Figure 1.
Note: If the shelf is not being aached to a stud you will need to insert plasc anchors using a drill with 7/32” drill bit to
make the hole.
STEP 2: Requires: Shelf Bracket, Screwdriver, Plasc Anchors (if no stud) and Installaon Screws
Use a screwdriver (not included) to mount the bracket ush against the wall with the installaon screws. If not installing
directly into studs, ensure the installaon screws are installed using the plasc anchors. See Figure 2.
STEP 3: Requires: Set Screws, Shelf, Level, and Shelf Brackets
Lower shelf onto shelf brackets. Use level to ensure the shelf is level, then align holes on the boom of the shelf with
the holes on the shelf bracket. Insert set screws through holes of bracket and into the boom of the shelf unl the shelf
is secured to the bracket. See Figure 3.
Only needed if not
hanging on a stud