22160
13m(7") ize The important safeguards and instructions appearing in this manual are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution and careful attention to detail are factors which cannot be built into this product. These factors must be supplied by the person or persons installing, caring for, and operating the unit.
FAN BODY SCREW BLADE BLADE ARM OUTLET BOX blade arm HANGER BRACKET 3 RECEIVER FLAT WASHER STAR WASHER SPRING WASHER SCREW RECEIVER HANGER BRACKET DOWNROD 4 CEILING SAFETY CABLE HANGER BRACKET 5 WASHER WASHER SCREW DOWNROD
OUTLET BOX GREEN WIRE RECEIVER RED WIRE PURPLE WIRE GREY WIRE WHITE WIRE BLUE WIRE HANGER BRACKET wire SCREW 7 HANGER BRACKET 8 CANOPY SCREW 9 10 CANOPY SCREW CANOPY HOLE COVER
LIGHT KIT ADAPTER SCREW 2. Gently pull the wire through light kit plate and attach light kit plate to light kit adapter. (see Fig.12,13) LIGHT KIT ADAPTER 3. Plug together light kit wires from fan to light kit wires from LED light kit and attach the LED light kit to the light kit plate using 3 screws in light kit plate. (see Fig.14,15,16) LIGHT KIT PLATE 4. Attach the shade by lining up tabs in light kit plate with grooves in the shade and twist clockwise until tight (see Fig.
COUNTER CLOCKWISE CLOCKWISE
TNA16110705
BLDC CEILING FAN REMOTE CONTROLLER WARNING! SHUT OFF THE POWER WITH FUSE OR CIRCUIT BREAKER. 1. SAFETY PRECAUTIONS: WARNING: HIGH VOLTAGE: Disconnect the electric power source by removing fuse or switching off circuit breakers. Only used for BLDC ceiling fans. Electrical wiring must meet all local and national electrical code requirements. Electrical source and fan must be 115/120 volt, 60Hz. Maximum fan motor 50W, maximum light watts: 40W LED only.