User's Manual

TECHNICAL DATA
DERMALOG FLC1 User Guide 13 / 22
5 Technical data
The technical data of the DERMALOG FLC1 are listed in Table 6.
Technical Features
Sensors
Thermal sensor
RGB sensor
3D sensor
Detection accuracy of body
temperature
± 0.5 °C
Measuring speed
0.7 - 2 s
Weight
130 g
Dimensions
120 mm x 37 mm x 23 mm
Interface
USB 3.0
SDK
.Net/C/C++/Java (coming soon)
Application software
DERMALOG Fever Detection
Ambient temperature and humidity
during operation
10 °C to 30 °C (50°F to 86°F), humidity 20 – 75 % non-condensing
Ambient temperature and humidity
when storing or transporting the
device
0 °C to 40 °C (32°F to 104°F), humidity 10 – 90 % non-condensing
Table 6: Technical data of DERMALOG FLC1
The software and hardware requirements for operating the DERMALOG FLC1 are listed in Table 7.
Requirements
Processor
Intel i5/ 8th generation (similar or equal)
RAM
8 GB DDR3 (minimum), 16 GB DDR4 (recommended)
Hard Drive
1 GB (SSD recommended)
Interfaces
USB 3.0 SuperSpeed
Power supply & current consumption:
 USB 3.0: 5 Volt ± 5%, 900 mA max.
Graphics card
Additional graphics card is recommended
Operating system
Windows 10
Table 7: Software and hardware requirements