User`s manual

89
(13) Data verification conditions and data editing conditions
Items Parameters Defaults Refer to:
Data block verification
Data to be verified
Data string verification 
Enable
Preset registration
Disable

Verification start position for data string
verification
001 to 999 positions
(Specify with ASCII characters)
1
Number of characters to verify for data
string verification
(without preset master registration)
01 to 99 positions
(Specify with ASCII characters)
99
Position of data block to verify for data
block verification
01 to 99 positions
(Specify with ASCII characters)
1
Disable

Enable code data transmission
Transmission of verification result for a
match
(When verification OK)
Enable OK transmission
Disable

Enable code data transmission
Transmission of verification result for a
mismatch
(When verification NG)
Enable OK transmission
Enable
Verification retry after fail judgment
in 2-point verification
Disable

Code type + code data

Verification range
Code data only
Section 6.1
Code type in data editing Selectable from codes available
Any code
(Note 1)
Enable
Transmit data regardless of the results
Disable 
Data string extraction mode 
Extraction block mode
Data extraction mode
AI mode
First position
Last position
Data string extraction mode
- Start position
Specified position 
Last character 
Specified digits
Data string extraction mode
- End position
Specified position
Data string extraction mode
- Specified position for extraction start
position
0001 to 9999 positions
(Specify with ASCII characters)
1
Data string extraction mode
- Specified position for extraction last
position
0001 to 9999 positions
(Specify with ASCII characters)
9999
Extraction block mode
- Extraction block number
(Maximum 3 blocks)
01 to 99 positions
(Specify with ASCII characters)
Not specified.
Section 6.2
(Note 1)Selecting "Any code" edits all types of codes.
: Can be changed only with the configuration software.